Reeling & Trailing Cables for Cranes & Mining — Feichun Special Cable Blogs – Explore Feichun's expert solutions for reeling cables used in cranes and ship unloaders, and trailing cables for mining. Our blog shares technical insights and product information to ensure high performance and safety in demanding industrial environments.

10 Min Read

SC-PNCT/SC-PNCT(S) multi-core cables represent the ultimate expression of flexible cable engineering—enabling single-cable power distribution for equipment with multiple independent motor systems, control circuits, and auxiliary equipment. Rather than requiring parallel single-core or dual-core cables with associated routing complexity and installation challenges, multi-core cables consolidate entire power distribution systems into a single, managed cable assembly. Fundamental Design Challenge: Multi-core cable design requires balancing multiple competing objectives. Maximum conductor count (10+ independent cores) demands significant outer diameter. Compact outer diameter (compatible with standard equipment hookups) limits conductor count. Electromagnetic shielding protects against interference but adds weight and cost. Each design decision trades off against others. Engineering Solution — 36 Configuration Matrix: Rather than offering a single "universal" multi-core cable, Feichun engineers 36 distinct configurations addressing different optimization priorities. Equipment designers can select from: • Simple configurations (3×1, 4×1, 5×1): Single conductor cores for basic multi-circuit distribution with minimal outer diameter • Intermediate configurations (2×3, 2×4, 3×3, 2×5, 3×4, 4×4): Multi-core groups for moderate circuit complexity • Advanced configurations (3×8, 3×9, 3×10): Maximum conductor counts for extremely complex equipment requiring 24–30 independent circuits This matrix approach enables optimal cable specification for each unique application—not compromising on weight, size, or cost for equipment that doesn't require ultimate complexity.

on14/04/2026

SC-PNCT/SC-PNCT(S) Multi-Core Cable Family

SC-PNCT/SC-PNCT(S) multi-core cables represent the ultimate expression of flexible cable engineering—enabling single-cable power distribution…

Discover More

8 Min Read

Feichun's comprehensive port equipment cable portfolio encompasses two primary cable family streams engineered for fundamentally different equipment operating environments, each with multiple reinforcement, shielding, and configuration variants optimized for specific applications. Design Philosophy: Rather than attempting to create a single universal cable for all port applications, Feichun engineers cables within two distinct families, each optimized for its operational environment. High-tension cables prioritize tensile strength and mechanical robustness for reel-mounted applications. Festoon cables prioritize bending flexibility and environmental durability for suspended overhead systems. Within each family, reinforcement, shielding, and configuration options address specialized requirements. Two Core Cable Families: 1. High-Tension Reel Cables (HT-PNCT Family) — Engineered for equipment where cables wind onto rotating reels including ship unloaders, stackers, reclaimers, and mobile cranes. Optimized for extreme tensile stress, intensive bending cycles, and long unsupported spans. 2. Festoon Suspended Cables (FC-PNCT Family) — Engineered for equipment with suspended overhead power distribution including container cranes, gantry cranes, and overhead bridge systems. Optimized for gentle bending, environmental durability, and multi-circuit power distribution. Within each family, variants address specialized requirements through reinforcement (enhanced tensile strength and service life), electromagnetic shielding (protection for VFD systems and automation electronics), and flexible configuration options (3–30 conductor cores, three conductor sizes).

Technical Department

on14/04/2026

Feichun Port Equipment Cable Portfolio

Feichun's comprehensive port equipment cable portfolio encompasses two primary cable family streams engineered for fundamentally different…

Discover More

14 Min Read

FC-PNCT-R and FC-PNCT(S)-R reinforced festoon cables represent the premium tier of overhead power distribution technology, engineered for next-generation crane systems demanding superior electrical performance, extended service life, electromagnetic compatibility, and multi-circuit power distribution capabilities. Reinforced festoon cables incorporate a fundamentally different architecture compared to standard festoon cables—adding mechanical reinforcement (braid-tape structure), overall electromagnetic shielding (in the shielded variant), and optimized multi-core configurations supporting independent circuit distribution. These enhancements address the operational requirements of modern automated port equipment, VFD-driven crane systems, and advanced cargo handling machinery. Key Design Innovations: • Integrated Reinforcement Layer: A tape-braid composite structure carrying a portion of mechanical stress, extending insulation life and reducing temperature rise during operation • Overall Screen Shielding: Tinned copper braid surrounding the entire cable assembly (in FC-PNCT(S)-R variant) providing complete electromagnetic protection • Multi-Core Architecture: 3–30 independent conductor cores enabling single-cable distribution for complex equipment with multiple independent motor systems • Size Flexibility: Three conductor size options (1.5, 2.5, 4.0) scaled to specific application requirements and current demands These innovations enable reinforced festoon cables to deliver 7–10 year service intervals in demanding applications—approximately 40–60% longer than standard festoon cables. For terminal operators prioritizing equipment reliability and minimizing replacement downtime, the premium investment in reinforced cables delivers outstanding value.

Technical Department

on14/04/2026

FC-PNCT-R/FC-PNCT(S)-R Reinforced Festoon Cables

FC-PNCT-R and FC-PNCT(S)-R reinforced festoon cables represent the premium tier of overhead power distribution technology, engineered for…

Discover More

14 Min Read

Festoon cables (also called curtain cables or loop cables) are specialized power distribution cables designed for overhead, suspended installations where the cable hangs in loops from fixed support points while a moving trolley or crane pulls the cable along beneath it. The term "festoon" derives from the architectural practice of hanging decorative swags between fixed points—a metaphor that accurately describes how these cables are installed in crane systems. FC-PNCT festoon cables serve as the primary power supply for overhead equipment including container cranes, gantry cranes, overhead bridge cranes, and related port equipment. The cable hangs in a series of gentle loops from fixed hanger points spaced approximately 5–10 meters apart. As the crane moves along the runway, the moving trolley pulls the cable along with it, creating a smooth, coordinated motion that maintains electrical contact between fixed shore power and the moving equipment. Festoon cables experience fundamentally different stresses compared to reel-mounted high-tension cables: • Repetitive bending cycles as the cable forms and reforms loops—but at a slower rate than reel cables • Lower tensile stress because the cable hangs relatively stationary between support points • Environmental exposure to saltwater spray, UV radiation, and thermal cycling—same as reel cables • Gentle, predictable bending geometry with consistent bend radii determined by hanger spacing • Lower operational temperature due to reduced mechanical stress and typically lower current demands These differences necessitate a distinctly different cable design optimized specifically for festoon applications. Festoon cables prioritize superior bending flexibility, excellent environmental resistance, and long-term durability under repetitive but gentle mechanical stress.

Technical Department

on14/04/2026

FC-PNCT Korean Standard Festoon Cables

Festoon cables (also called curtain cables or loop cables) are specialized power distribution cables designed for overhead, suspended…

Discover More

15 Min Read

HT-PNCT cable family represents a comprehensive, professional ecosystem of high-tension power distribution cables engineered to serve the complete spectrum of port equipment applications. Rather than a single cable type, HT-PNCT encompasses a carefully developed family of variants, each optimized for specific application requirements, electrical loads, environmental conditions, and operational constraints. The family architecture is organized around five core cable types: 1. HT-PNCT-RF — Reinforced Festoon variant with large conductor sizes (240–300 sq mm) and flexible sheath options (1.5, 2.5, 4.0 mm). Optimized for extended-span festoon applications with demanding tensile and environmental requirements. 2. HT-PNCT (Standard) — Non-shielded multi-core configuration (3–30 conductor cores) with optimized conductor size and sheath thickness combinations. Base specification for equipment without sensitive electronics or electromagnetic sensitivity. 3. HT-PNCT(S) — Shielded variant of standard cable featuring tinned copper braid shield. Engineered for equipment with variable frequency drive (VFD) motors, crane controls, and sensitive automation electronics requiring electromagnetic interference (EMI) attenuation. 4. HT-PNCT-R — Reinforced non-shielded variant with enhanced mechanical strength and extended tensile capacity. For applications requiring maximum tensile strength without electromagnetic protection needs. 5. HT-PNCT(S)-R — Premium reinforced-shielded variant combining maximum tensile strength with full electromagnetic protection. For next-generation high-power equipment with VFD systems and extreme service life requirements. This family structure enables terminal operators to select the optimal cable for each specific application—balancing performance, cost, environmental requirements, and operational constraints. The shared engineering platform across family members ensures interoperability and simplifies spare cable management.

Technical Department

on13/04/2026

Complete HT-PNCT High Tension Cable Family

HT-PNCT cable family represents a comprehensive, professional ecosystem of high-tension power distribution cables engineered to serve the…

Discover More

15 Min Read

HT-PNCT-F cable, Korean standard cable, high tension cable, port equipment cable, festoon-reel cable, unloader cable, stacker cable, reclaimer cable, gantry crane cable, tape braid reinforcement, 0.6/1KV cable, KSC 3317, IEC 60502-1, tape reinforcement, braid reinforcement, cable architecture, layer structure, synthetic tape, polyester tape, polypropylene tape, braid layer, glass-fiber reinforced nylon, hybrid reinforcement, tape-braid hybrid, load-carrying mechanism, copper conductor, Class 2 stranding, EP rubber insulation, chloroprene sheath, outer diameter, cable weight, conductor resistance, insulation resistance, test voltage, dielectric strength, tensile strength, flex-cycle endurance, impact resistance, bending flexibility, reelability, environmental durability, saltwater resistance, UV resistance, thermal cycling, flame retardance, operational temperature, 3-core configuration, 4-core configuration, conductor size range, ship unloader, gantry crane, stacker reclaimer, mobile harbour crane, conveyor drive system, reel preparation, minimum bend radius, cable winding, slip ring termination, preventive maintenance, insulation resistance test, quality assurance, electrical testing, mechanical testing, reinforcement layer testing, environmental testing, reel-specific testing, ASTM B117, IEC 60811, ISO 12947, IEC 60331-1, Feichun HT-PNCT-F, HT-PNCT-F-S shielded, HT-PNCT-F-EX enhanced braid, HT-PNCT-F-SX full premium, VFD cable, EMI shielding, port terminal, Busan port, Korean Industrial Standard, festoon power supply, reel-mounted equipment

Technical Department

on13/04/2026

HT-PNCT-F Korean Standard High Tension Cables

HT-PNCT-F cable, Korean standard cable, high tension cable, port equipment cable, festoon-reel cable, unloader cable, stacker cable, reclaimer…

Discover More

17 Min Read

Japanese Standard High Tension (HT) cables with Kevlar® reinforcement represent the pinnacle of specialized power distribution technology for demanding marine port applications. Engineered to conform to Japanese Industrial Standards (JIS C 3317, JIS C 3350), these cables incorporate integrated aramid reinforced layers that dramatically enhance tensile strength while maintaining the flexibility required for reel-mounted equipment operation. The term "high tension" in Japanese maritime engineering refers specifically to the mechanical tension and longitudinal stress experienced by cables subjected to extreme operational demands—including extended unsupported spans, repetitive reel cycling, heavy dynamic loading, and sustained exposure to marine environments. Unlike standard port cables, Japanese Standard HT cables with Kevlar® reinforcement are engineered for applications where: • Unsupported cable spans exceed 40–60 meters between ship and shore equipment or between reel stations • Combined electrical load and mechanical tension create dual stress conditions requiring advanced material science • Long service life expectancy (7–10+ years) justifies premium reinforcement material investment • Environmental exposure to saltwater aerosol, UV radiation, and thermal cycling demands superior polymer formulation • High-availability terminal operations cannot tolerate premature cable failure and operational downtime The integration of Kevlar® aramid reinforcement layers represents a fundamental departure from conventional cable design. Rather than relying solely on rubber insulation and polymer sheathing to provide mechanical strength, Kevlar-reinforced cables employ a specialized tension layer that carries a portion of the cable's weight and operational stress, thereby reducing stress on the insulation and extending overall cable service life by 40–60% compared to unreinforced designs.

Technical Department

on13/04/2026

Japanese Standard High Tension Cables with Kevlar® Reinforcement

Japanese Standard High Tension (HT) cables with Kevlar® reinforcement represent the pinnacle of specialized power distribution technology for…

Discover More

10 Min Read

High Tension (HT) cables are specialized power distribution cables designed for reel-mounted applications in port equipment—primarily unloaders, stackers, reclaimers, and gantry cranes. The term "high tension" does not refer to electrical voltage (HT cables are 0.6/1 kV, standard port equipment voltage); instead, it refers to the mechanical tension and stress that these cables experience when wound on reels and unwound during equipment operation. HT-PNCT cables serve as the primary power supply line running from the equipment's fixed power source (shore power or generator) to the reel-mounted slip ring assembly on moving equipment. During operation, these cables are repeatedly wound onto and unwound from rotating reels, experiencing: • Tensile stress from the cable's own weight as it hangs from the reel to the equipment • Bending stress each time the cable wraps around the reel drum • Mechanical abrasion from friction against the reel surface and cable guides • Environmental exposure to saltwater spray, UV radiation, and thermal cycling Standard festoon cables (like FC-PNCT) are optimized for relatively stationary installations. HT-PNCT cables are engineered specifically for reel-wound, dynamic applications where these mechanical stresses dominate the cable's service life.

Technical Department

on13/04/2026

HT-PNCT High Tension Cables

High Tension (HT) cables are specialized power distribution cables designed for reel-mounted applications in port equipment—primarily…

Discover More

9 Min Read

Technical Department

on13/04/2026

PNCT-F Flat Type Cables & Cable Specification System

PNCT-F designation identifies cables with a flat profile cross-section, as opposed to the standard round profile. While round cables are…

Discover More

11 Min Read

PNCT-R designation represents the advanced evolution of the standard PNCT cable. The suffix -R stands for Reinforced—indicating the presence of an integrated aramid reinforcement layer built into the cable structure between the insulation and sheath. While standard PNCT cables rely entirely on copper conductor tensile strength to support catenary loads, PNCT-R cables distribute mechanical loads across both the copper conductors AND a dedicated load-bearing reinforcement layer. This fundamental design difference transforms the cable's performance envelope: PNCT-R cables achieve 10–12 year service life in high-utilization port terminals, compared to 4–6 years for standard PNCT. The reinforcement layer is not a luxury add-on; it is an engineering necessity for any port crane cable expected to operate continuously for a contract period exceeding 5 years. From a standards perspective, PNCT-R cables conform fully to KSC IEC 60502-1, meeting all electrical, mechanical, and environmental requirements. The reinforcement layer is an enhancement above the base standard—it does not replace or circumvent the standard; it exceeds it.

Technical Department

on13/04/2026

PNCT-R: Reinforced Port Crane Cables with Advanced Kevlar® Weaving

PNCT-R designation represents the advanced evolution of the standard PNCT cable. The suffix -R stands for Reinforced—indicating the presence…

Discover More

11 Min Read

KSC 3317 Standard (Korean Industrial Standard C 3317: "Rubber Insulated Flexible Cables — 0.6/1kV") is the authoritative technical specification for cabtyre and flexible power cables used throughout industrial Korea and the international markets where Korean engineering standards are recognized. Adopted as a modification of IEC 60502-1, the KSC 3317 standard defines comprehensive requirements for: Conductor materials and stranding patterns • Insulation thickness and composition • Sheath material and durability requirements • Electrical performance at rated voltage • Mechanical properties including tensile strength and elongation • Temperature operating ranges and chemical resistance • Test methods for verification and certification For port crane and ship unloader applications, cables manufactured to KSC 3317 represent the consensus engineering standard across Asia-Pacific maritime terminals. Korean container terminal operators in Busan, Incheon, and Gwangyang port complexes universally specify KSC 3317-compliant cables for all festoon, cableveyor, and hoist systems. The standard's adoption by major STS crane manufacturers (including Liebherr, Konecranes, and Kalmar) has made KSC 3317 the de facto global specification for Japanese-compatible port crane cables.

Technical Department

on13/04/2026

KSC 3317 Port Crane & Ship Unloader Cables

KSC 3317 Standard (Korean Industrial Standard C 3317: "Rubber Insulated Flexible Cables — 0.6/1kV") is the authoritative technical…

Discover More

12 Min Read

$Port crane festoon cables endure conditions that few other industrial cables ever face. A single cable suspended in a festoon system supporting an STS (Ship-To-Shore) crane—or running through a cableveyor transport mechanism—must simultaneously: Support its own weight across spans of 50–100+ meters. Flex continuously as the crane trolley or transport carriage moves back and forth, experiencing tens of thousands of bend cycles per year. Resist mechanical abrasion from guide rollers, sheaves, fairleads, and cable troughs. Survive saltwater spray and UV exposure common to marine terminal environments. Conduct electrical power reliably while maintaining dielectric integrity under all dynamic stress conditions. This multi-hazard environment creates a specific failure mode that conventional cables struggle to handle: self-weight mechanical fatigue. As the cable hangs under its own weight, the copper conductors experience a catenary load distribution. The top of the cable bears the cumulative weight of the entire cable length below it. When the crane moves and the cable flexes, this catenary load creates internal mechanical stress—tension applied directly to the copper strands without a mechanism to distribute or absorb the force. Over time, typically 3–5 years, the copper conductors begin to work-harden and fracture. Electrical resistance increases. Localized corrosion begins. Eventually, the cable fails not because of insulation breakdown or sheath perforation, but because the mechanical integrity of the conductor system has been compromised by repeated tension and flexure cycles.$

Technical Department

on13/04/2026

Kevlar®-Reinforced Port Crane & Ship Unloader Cables

Port crane festoon cables endure conditions that few other industrial cables ever face. A single cable suspended in a festoon system…

Discover More

12 Min Read

JIS C 3327 designation system is elegant in its logic. Every cable name follows a predictable, parseable structure where each character or character group carries a specific, unambiguous meaning. Once you understand the five material symbols and the four flexibility classes, you can decode any of the 15 cable types defined by the standard—and immediately know what the cable is made of, how flexible it is, and what applications it is suited for.

Technical Department

on13/04/2026

JIS C 3327 Cable Code Designation

JIS C 3327 designation system is elegant in its logic. Every cable name follows a predictable, parseable structure where each character or…

Discover More

16 Min Read

600V 2TC-RB is the TRACAB® product line cable designed to perform reliably across all three transport methods: curtain (festoon), carrier drum (reeling), and cableveyor (enclosed track). Manufactured to JIS C 3327 Class 2, this cable combines the proven EP rubber insulation and polychloroprene rubber sheathing platform with Class 2 conductor construction optimised for the specific bending profiles and fatigue modes encountered in each transport architecture. The Kevlar® para-aramid fibre braided tensile reinforcement provides the mechanical backbone that enables a single cable design to absorb the dynamic loads generated by catenary suspension, drum winding, and track-guided travel without transferring stress to the conductors or insulation system.

Technical Department

on13/04/2026

600V 2TC-RB TRACAB® Kevlar®-Reinforced Crane Cable

600V 2TC-RB is the TRACAB® product line cable designed to perform reliably across all three transport methods: curtain (festoon), carrier drum…

Discover More

23 Min Read

6600V 3PNCT cable, manufactured to the Japanese Industrial Standard JIS C 4353 Class 3, is the purpose-built high voltage cable solution for these demanding applications. It combines the same fundamental material technologies proven in the 600V 2PNCT family—EP rubber insulation, polychloroprene rubber sheathing, tinned copper conductors, tinned copper/cotton yarn braid shielding, and Kevlar® para-aramid fibre braided tensile reinforcement—but with substantially enhanced insulation systems and construction techniques required for safe, reliable operation at 6,600V. The cable features a semiconductive stress-grading layer at the conductor/insulation interface, 5.0–5.5 mm thick EP rubber insulation (compared to 0.8–2.5 mm in 600V cables), a metallic braid shield for electric field containment, and a dual-layer polychloroprene sheath with an intermediate reinforcement layer for maximum mechanical protection.

Technical Department

on13/04/2026

6600V 3PNCT Kevlar®-Reinforced High Voltage Crane Cable

6600V 3PNCT cable, manufactured to the Japanese Industrial Standard JIS C 4353 Class 3, is the purpose-built high voltage cable solution for…

Discover More

21 Min Read

600V 2TC Light-SB (600V 2PNCT-SB) cable solves this problem. Built on the same proven JIS C 3327 platform as the unshielded 2TC Light, it adds a critical engineering layer: a tinned copper wire braided combined with cotton yarn shielding that surrounds the insulated conductor bundle. This hybrid metallic/textile braid provides effective EMI containment across the full VFD emission spectrum, preventing radiated noise from escaping power cables and protecting control cables from external interference. Combined with the Kevlar® para-aramid fibre braided tensile reinforcement for mechanical load bearing, the 2TC Light-SB delivers both electromagnetic cleanliness and structural durability in a single cable design purpose-built for the electrical and mechanical demands of modern VFD-controlled port cranes.

Technical Department

on13/04/2026

600V 2TC Light-SB (2PNCT-SB) Shielded Crane Cable

600V 2TC Light-SB (600V 2PNCT-SB) cable solves this problem. Built on the same proven JIS C 3327 platform as the unshielded 2TC Light, it…

Discover More

19 Min Read

The 600V 2TC Light (600V 2PNCT) cable, manufactured to the Japanese Industrial Standard JIS C 3327, represents one of the most proven and widely deployed cable designs for port crane and ship unloader applications worldwide. This cable combines ethylene propylene (EP) rubber insulation for superior dielectric performance, polychloroprene rubber sheathing for environmental protection, and—critically—a Kevlar® para-aramid fibre braided tensile reinforcement layer that transforms the cable from a simple electrical conductor into a load-bearing mechanical component capable of supporting its own weight and absorbing the extreme dynamic forces generated by crane operation.

Technical Department

on13/04/2026

600V 2TC Light (2PNCT) Kevlar®-Reinforced Crane Cable

The 600V 2TC Light (600V 2PNCT) cable, manufactured to the Japanese Industrial Standard JIS C 3327, represents one of the most proven and…

Discover More

10 Min Read

crane cable range is a complete family of six specialised cable types engineered to cover every electrical and data connection on modern port cranes — from the simplest yard crane spreader circuit to the most complex automated STS crane with integrated fibre optic networking. The family is divided into two series: the WS-RLIN series for motorised cable reel systems, and the WS-SPRD series for gravity collector basket (festoon basket) systems. Every cable in the range shares a common engineering foundation: JIS C 3327 compliance for rubber-insulated machinery cables, chloroprene rubber (CR) sheathing for oil/ozone/UV resistance, EPR insulation rated to 90°C, and an ambient temperature range of −40°C to +90°C that covers every port environment on earth from arctic to tropical. Within this shared foundation, each cable type is differentiated by its reinforcement system, voltage class, conductor range, and application-specific optimisations.

Technical Department

on13/04/2026

WALSREEN® Complete Port Crane Cable Range

crane cable range is a complete family of six specialised cable types engineered to cover every electrical and data connection on modern port…

Discover More

19 Min Read

WS-SPRD-HEXNCT was engineered specifically for this extreme duty class. Its defining characteristic is the HEXNCT enhanced chloroprene rubber sheath — a heavy-duty outer layer with thickness ranging from 4.5 mm to 5.1 mm, representing a 36–38% increase over the standard WS-SPRD-2PNCT's 3.3–3.7 mm sheath. This enhanced sheath provides a dramatically larger abrasion wear allowance at basket carrier contact points, greater resistance to mechanical impact from falling debris, and a more robust barrier against the chemical and environmental hazards of the container crane operating environment.

Technical Department

on13/04/2026

WALSREEN® WS-SPRD-HEXNCT Spreader Basket System Flexible Cable

WS-SPRD-HEXNCT was engineered specifically for this extreme duty class. Its defining characteristic is the HEXNCT enhanced chloroprene rubber…

Discover More

20 Min Read

WS-SPRD-2PNCT was engineered specifically for this unforgiving application. It combines high-core-count construction (30, 36, or 42 cores at 3.5 mm²) to carry the full complement of spreader control and signal circuits in a single cable, steel-wire-stranded conductors for tension resistance under self-weight suspension, chloroprene rubber sheathing for oil, ozone, and UV resistance in coastal port environments, and a cable geometry specifically optimised for the continuous lateral bending and catenary formation cycles unique to gravity collector basket systems. Manufactured to dual standards — JIS C 3327 (rubber-insulated machinery cables) and VDE 0250-813 (flexible cables) — the WS-SPRD-2PNCT represents dedicated engineering for a niche but mission-critical application. A failed spreader basket cable means a stopped crane, a grounded spreader, and halted container operations. There is no redundancy — the cable is the sole electrical lifeline between the crane's trolley and the spreader that grips the containers.

Technical Department

on13/04/2026

WALSREEN® WS-SPRD-2PNCT Spreader Basket System Flexible Cable

WS-SPRD-2PNCT was engineered specifically for this unforgiving application. It combines high-core-count construction (30, 36, or 42 cores at…

Discover More

25 Min Read

WS-RLIN-3PNCT-OF is the engineering answer to this convergence challenge. It integrates three-phase medium-voltage power conductors (3 × 38–60 mm² at AC 6,600 V) with a dedicated neutral/earth return conductor and six optical fibres housed in individually colour-coded ETFE protective tubes — all within a single Kevlar®-reinforced, chloroprene-sheathed cable construction. This hybrid design eliminates the need for separate power and fibre optic cables on the reel system, reducing reel complexity, installation time, maintenance burden, and total cable weight, while ensuring perfect synchronisation between power and data paths — because both travel through the same physical cable at all times.

Technical Department

on13/04/2026

WALSREEN® WS-RLIN-3PNCT-OF Hybrid Power & Fibre Optic Reel System Flexible Cable

WS-RLIN-3PNCT-OF is the engineering answer to this convergence challenge. It integrates three-phase medium-voltage power conductors (3 × 38–60…

Discover More

20 Min Read

Modern port logistics infrastructure demands electrical cables that can withstand punishing mechanical conditions no ordinary flexible cable is designed to endure. A travelling cable reel system on a ship-to-shore container crane, bulk ship unloader, or harbour gantry crane repeatedly spools and unspools the cable as the trolley, grab, or spreader traverses its operating range — subjecting the cable to continuous tensile loading, cyclical bending around the reel drum, torsional forces from crane slew motion, and environmental assault from coastal salt spray, UV radiation, hydraulic oil contamination, and extreme temperature swings. The cable must survive hundreds of thousands of these combined loading cycles across a service life measured in years, not months.

Technical Department

on13/04/2026

WALSREEN® WS-RLIN-2PNCT / WS-RLIN-3PNCT Reel System Flexible Cable

Modern port logistics infrastructure demands electrical cables that can withstand punishing mechanical conditions no ordinary flexible cable…

Discover More

19 Min Read

$WS-RLIN-2PNCT-KB was engineered specifically to solve this challenge. Its defining innovation is a Kevlar® aramid fibre reinforcing layer — the same poly-paraphenylene terephthalamide material used in military-grade ballistic body armour — woven into a proprietary helical braid pattern that distributes tensile load uniformly across the cable's cross-section. This Kevlar reinforcement delivers tensile strength comparable to steel braid at a fraction of the weight, eliminates the fatigue-induced wire breakage that plagues conventional steel-armoured reeling cables, and maintains exceptional flexibility throughout the cable's operational life.$