Reeling & Trailing Cables For Cranes & Mining — Feichun Special Cable Blogs - Explore Feichun's Expert Solutions For Reeling Cables Used In Cranes And Ship Unloaders, And Trailing Cables For Mining. Our Blog Shares Technical Insights And Product Information To Ensure High Performance And Safety In Demanding Industrial Environments.

Other special cables

13 Min Read

FLEXIDRUM® MEDIUM FLAT: Advanced High-Flexibility Salt-Fog Resistant Port Cable System Specialized reeling-flat power cable engineered for extreme maritime environments combining flexible tinned copper conductors (IEC 60228 Class 5), proprietary EPR insulation chemistry, hydrophobic semi-conductive interfaces, and specialized red outer-sheath PCP compound with integrated volatile-corrosion-inhibitor (VCI) technology. Designed for rapid cable-reel deployment systems in dredging, submersible pump, and floating crane applications requiring superior electrochemical corrosion immunity and compact outer-diameter efficiency across 3.6/6 kV through 8.7/15 kV voltage platforms.

Technical Department

on20/05/2026

NGFLGÖU: Полная Техническая Замена и Альтернативы для Систем Festoon

**NGFLGÖU** — это обозначение **немецкого плоского Festoon кабеля**, разработанного в 1970–1980х годах в Германии для портовых и промышленных…

6 Min Read

GAALFLEX® CONTROL 1000 SC CY: Radiation-Hardened Single-Core Shielded Control Cable for Nuclear Power Plants and Medical Linear Accelerator Facilities (0.6/1 kV Nominal Voltage, 4 kV Test Voltage per DIN VDE 0281, 80 Mrad Cumulative Radiation Tolerance per Industry Standards Enabling Integration into Extreme Radiation Environments Including Nuclear Reactor Containment, Medical Linear Accelerator Beam-Shaping Rooms, and Gamma Sterilization Facilities, Class 5 Flexible Red Bare Copper per IEC 60228, PVC Type TI2 Insulation, Tinned-Copper-Braid Overall Screen Achieving ≥80 dB EMI Shielding, Black (RAL 9005) PVC Type TM2 Outer Sheath, Dual Color Options: Black Conductor or Green-Yellow Earth Protection Conductor, Chemical and UV Resistance Enabling Deployment in Outdoor Facility Perimeters and Industrial Processing Environments, Oil Resistance per DIN VDE 0473 and IEC 60811-2-1, Flame-Retardant and Self-Extinguishing per DIN VDE 0482, Temperature Range −40 to +80°C Fixed Installation / −5 to +80°C Flexible Deployment, 10×D Minimum Bending Radius, Maximum Short-Circuit Temperature +250°C, Standardized Cross-Section Portfolio Spanning 6 mm² Through 240 mm² per Single Core Enabling Complete Radiation-Hardened Electrical Integration from Small Control Circuits Through Large Power Distribution, RoHS and CE Certified, Engineered for Nuclear Facility Electrical Integration, Medical Linear Accelerator Control Systems, Gamma Sterilization Industrial Facilities, Extreme Radiation-Environment Signal and Power Distribution, and Mission-Critical Installations Where Cumulative Radiation Hardness and Shielded Single-Core Integrity Are Non-Negotiable Requirements)

Technical Department

on20/05/2026

Переход с VDE 0250 на ГОСТ: Полная Таблица Соответствия и Техническое Руководство

Всеобъемлющее техническое руководство по переходу с немецких стандартов DIN VDE 0250-813 на российские ГОСТ стандарты — полная таблица…

7 Min Read

GAALFLEX® VFD 600 XLPE/PVC: 600 V Low Voltage PWM Frequency Converter Motor Cable—Comprehensive Polymer Science, Electrical Engineering and Cost–Performance Analysis XLPE insulation (1–3% gel content) and PVC sheath cost-optimization strategy for North American low-voltage industrial markets; trade-off analysis versus halogen-free alternatives (LSZH, CPE, TPE); PWM inverter electromagnetic environment (1–5 kHz switching, 0.4–2 kV/μs voltage ramps, harmonic spectrum to 10 kHz, common-mode voltage transients); copper conductor skin-effect AC resistance elevation (65% increase at 5 kHz requiring 15–20% thermal derating for continuous duty); XLPE dielectric properties (frequency-dependent εᵣ, tan δ exponential growth, PDIV ~10–12 kV with 17× safety margin); PVC flame-retardancy chemistry (halogenated radical scavenging, VW-1/IEEE 1202/ICEA T-29-520 vertical propagation testing); three-phase red-copper conductors (ASTM B-3/B-8) with three-conductor earth-return grounding architecture; corrugated copper-tape screening (RFI/EMI suppression Class A/B); temperature range −40°C flexible to +90°C continuous; sixteen SKU configurations (16 AWG to 500 MCM); North American standards ecosystem (UL 44/1277, NEMA WC 57, IEEE 1202, ICEA T-29-520); MSHA approval for coal/mineral hazardous areas; life-cycle cost analysis and downtime economics; complete engineering dataset: 46+ performance tables, 19 chemical/electrical equations, 13 worked calculations.

Technical Department

on20/05/2026

PROTOLON (SMK)-LWL 6/10 kV: Ультримощный Портовый Кабель для Мировых Гигапортов

Выбор между 3.6/6 kV и 6/10 kV — это выбор между **средней и высокой мощностью**. Порт, который ежедневно обрабатывает 5,000–8,000 контейнеров…

7 Min Read

FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU：高柔性盐雾防护港口电缆专业级高柔性盐雾防护电源电缆，专为恶劣海洋环境设计。采用最小12×D鼓面弯曲半径、超强盐雾腐蚀防护、UV/臭氧/湿度防护，跨越3.6/6kV至12/20kV完整电压平台。专用于挖泥船、海洋泵站和港口设备，15年+服役期验证。港口电缆技术革新：恶劣海洋环境的专业防腐蚀工程传统电源电缆部署在盐雾海洋环境中会遭遇加速退化机制：卤化物诱导的铜导体电化学腐蚀、渗透水通过外护套微裂纹、光化学紫外线降解聚合物基质、臭氧氧化聚合物交链脆化。标准FLEXIDRUM®电缆（非专化聚合物护套）在持续港口运行的7-10年内经历~35-50%的机械抗张强度损失，导致提前更换周期和港口设备运行中的意外维护中断。 FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU代表材料化学和护套架构的突破性进展，整合：(1)专化PCP外护套化合物，具有专有防盐雾化学物质（氯化钠渗透防护比标准PCP配方高2倍，符合IEC测试规程），(2)先进多层半导电屏障界面，具有疏水分子结构，防止锡铜导体上的电化学腐蚀途径，(3)集成UV/臭氧吸收添加剂，在15年以上服务周期内减少聚合物链断裂退化约60%，(4)优化柔性架构，支持12×D鼓面部署半径（相比常规专化电缆的15×D及更高），对需要跨地理分布港口设施频繁再部署的移动挖泥设备至关重要。

Technical Department

on20/05/2026

PROTOLON (SMK)-LWL: Многофункциональный 3.6/6 kV Оптоволоконный Портовый Кабель

Традиционно портовые краны использовали **два отдельных кабеля**: (1) силовой кабель для электроэнергии; (2) коммуникационный кабель для…

7 Min Read

GAALFLEX® VFD NYCWY: 600V/1000V European Standard Power Cable with Concentric Copper Conductor Shielding, Underground Direct-Burial Installation Capability, Frequency Converter Integration, Control Impulse & Test Data Transmission, 2–4 Cores, 10–240 mm² Solid/Stranded Red Copper, PVC DIV4 Insulation, Corrugated Copper Wire + Tape Screening, Self-Extinguishing Flame-Retardant, DIN VDE 0276/IEC 60502 Compliance, Utility Substation & Subscriber Network Deployment | European Underground Utility VFD Power Cable UL-certified European standard 600V/1000V underground direct-burial power cable with unique concentric copper conductor shielding combining solid or stranded red copper with PVC DIV4 insulation, corrugated copper wire + tape concentric shielding, and professional utility-grade grounding continuity—addressing underground direct-burial specification (subscriber networks, power stations), dual-voltage power distribution (600V/1000V), frequency converter system integration, control signal and test data transmission, utility substation infrastructure, and comprehensive European underground power distribution infrastructure simultaneously.

Technical Department

on20/05/2026

PROTOLON(SC): Высоковольтные Электрические Кабели для Береговых Линий Кораблей

Полное техническое руководство по PROTOLON(SC) системам береговых кабелей — IEC/ISO/IEEE 80005-1 международный стандарт, 6/10 kV береговая…

4 Min Read

FLEXIDRUM® MEDIUM FLAT: Advanced High-Flexibility Salt-Fog Resistant Port Cable System Specialized reeling-flat power cable engineered for extreme maritime environments combining flexible tinned copper conductors (IEC 60228 Class 5), proprietary EPR insulation chemistry, hydrophobic semi-conductive interfaces, and specialized red outer-sheath PCP compound with integrated volatile-corrosion-inhibitor (VCI) technology. Designed for rapid cable-reel deployment systems in dredging, submersible pump, and floating crane applications requiring superior electrochemical corrosion immunity and compact outer-diameter efficiency across 3.6/6 kV through 8.7/15 kV voltage platforms.

Technical Department

on20/05/2026

PROTOLON XPRT -50°C: Портовые Кабели для Арктических Условий

Стандартные электрические кабели, такие как обычный PROTOLON XPRT (рассчитанный на -35°C минимум), содержат материалы, которые становятся…

8 Min Read

FLEXIDRUM® MEDIUM PLUS (N)TSCGEWÖU: Revolutionary Ultra-High-Speed Extended-Voltage Hybrid Power-Signal-Optical Cable for Next-Generation Mega-Port Automation, Offshore Mobile Lifting, and Advanced Forced-Guidance Systems Breakthrough next-generation hybrid electrical-optical cable engineered for the extreme-speed, extended-voltage, and real-time-telemetry requirements of modern mega-port gantry cranes, offshore mobile lifting platforms, and next-generation automated container-handling infrastructure. FLEXIDRUM® MEDIUM PLUS combines Class 5 ultra-flexible red copper conductors, EPR type 3GI3 thermoplastic rubber insulation, integrated 12–24 fiber-optic elements, advanced anti-twisting synthetic yarn reinforcement, and specialized salt-fog-resistant PCP outer sheath to deliver unified electrical power-signal-optical distribution at unprecedented 300 m/min maximum deployment speed (highest industry capability) across extended voltage range 3.6 kV to 18/30 kV, with proven reliability across −35 to +80°C operational envelope and comprehensive DIN VDE / EN / IEC marine and port automation certification.

Technical Department

on20/05/2026

PROTOLON XPRT 300 м/мин и (IQ): Революция в Портовых Умных Кабелях

PROTOLON XPRT был впервые представлен при максимальной скорости развертывания 240 м/мин для обслуживания самых современных контейнерных кранов…

9 Min Read

FLEXIDRUM® R 702: Advanced Salt-Spray Resistant Multi-Core Cable for Maritime Port Infrastructure and Container Handling Systems Engineered for extreme corrosive marine environments, the FLEXIDRUM® R 702 delivers proven salt-fog resistance combined with Class 5 flexible conductor technology, GAALTHERM® 630 thermoplastic insulation, and advanced anti-twisting textile reinforcement. Designed for automated container spreader bars, vertical lifting platforms, and offshore equipment exposed to continuous salt-spray cycles—meeting DIN VDE, EN, and IEC standards with reduced weight and diameter for enhanced installation flexibility in modern port automation infrastructure.

Technical Department

on20/05/2026

PROTOLON SMRT vs XPRT: Техническое Руководство по Выбору Кабеля

PROTOLON семейство кабелей разрабатывалось Prysmian Group на протяжении двух декад как ответ на эволюцию портового оборудования. Исторически,…

кабель для шахт

7 Min Read

FLEXIDRUM® MEDIUM FLAT: Advanced High-Flexibility Salt-Fog Resistant Port Cable System Specialized reeling-flat power cable engineered for extreme maritime environments combining flexible tinned copper conductors (IEC 60228 Class 5), proprietary EPR insulation chemistry, hydrophobic semi-conductive interfaces, and specialized red outer-sheath PCP compound with integrated volatile-corrosion-inhibitor (VCI) technology. Designed for rapid cable-reel deployment systems in dredging, submersible pump, and floating crane applications requiring superior electrochemical corrosion immunity and compact outer-diameter efficiency across 3.6/6 kV through 8.7/15 kV voltage platforms.

Technical Department

on20/05/2026

Альтернатива Prysmian PROTOLON: Шахтные (N)TSCGEWÖU из Китая с Сертификатом EAC

Полное техническое руководство по замене Prysmian PROTOLON на гибкие шахтные кабели (N)TSCGEWÖU производства Feichun с полным сертификатом EAC…

6 Min Read

FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU：高柔性盐雾防护港口电缆专业级高柔性盐雾防护电源电缆，专为恶劣海洋环境设计。采用最小12×D鼓面弯曲半径、超强盐雾腐蚀防护、UV/臭氧/湿度防护，跨越3.6/6kV至12/20kV完整电压平台。专用于挖泥船、海洋泵站和港口设备，15年+服役期验证。港口电缆技术革新：恶劣海洋环境的专业防腐蚀工程传统电源电缆部署在盐雾海洋环境中会遭遇加速退化机制：卤化物诱导的铜导体电化学腐蚀、渗透水通过外护套微裂纹、光化学紫外线降解聚合物基质、臭氧氧化聚合物交链脆化。标准FLEXIDRUM®电缆（非专化聚合物护套）在持续港口运行的7-10年内经历~35-50%的机械抗张强度损失，导致提前更换周期和港口设备运行中的意外维护中断。 FLEXIDRUM® MEDIUM RS (N)TSCGEWÖU代表材料化学和护套架构的突破性进展，整合：(1)专化PCP外护套化合物，具有专有防盐雾化学物质（氯化钠渗透防护比标准PCP配方高2倍，符合IEC测试规程），(2)先进多层半导电屏障界面，具有疏水分子结构，防止锡铜导体上的电化学腐蚀途径，(3)集成UV/臭氧吸收添加剂，在15年以上服务周期内减少聚合物链断裂退化约60%，(4)优化柔性架构，支持12×D鼓面部署半径（相比常规专化电缆的15×D及更高），对需要跨地理分布港口设施频繁再部署的移动挖泥设备至关重要。

Technical Department

on20/05/2026

Замена Nexans PANZERFLEX в России: Аналоги по ГОСТ и ТР ТС

Полное техническое руководство по замене европейских барабанных кабелей Nexans PANZERFLEX на производство Feichun — соответствие российским…

8 Min Read

FLEXIDRUM® NSHTÖU (V): High-Flexibility Salt-Spray-Resistant Festoon Cable for Dynamic Port Terminal Applications Engineered for continuous rapid-deployment and high-cycling harbour equipment, FLEXIDRUM® NSHTÖU (V) combines tinned Class 5 flexible copper conductor, Kevlar central reinforcement, fire-resistant EPR insulation, and oil-resistant rubber outer sheath to deliver unmatched reliability in extreme salt-spray marine environments. Rated for 180 m/min maximum deployment speed, −25 to +90°C temperature stability, and 0.6/1 kV nominal specifications across 3–44 core configurations (0.5–10 mm² cross-section range), this advanced festoon solution provides comprehensive protection against corrosion, thermal cycling, mechanical flex-fatigue, and rapid-reeling stress for harbour cranes, container-handling spreader systems, dock-automation equipment, and specialized port terminal infrastructure.

Technical Department

on20/05/2026

How to Choose Between PUR and PCP Outer Sheaths for Mobile Mining Equipment

Polyurethane (PUR) is a synthetic polymer created by reacting isocyanates with polyols. The resulting material is elastomeric (rubber-like)…

9 Min Read

Feichun FLEXIFESTOON® Maritime Salt-Fog Resistant Cable: Next-Generation Port Control Cable (VDE 0250 Part 813, −35 to +80°C, Advanced EPR Insulation with Polymer Chain Stabilization, Copper Tinned Shielding Architecture, Comprehensive Salt-Fog/Ozone/UV/Moisture Resistance, 240 m/min Festoon Speed Rating, 4×D Dynamic Bending Radius, Flexible Copper Conductor (IEC 60228 Class 5), Yellow Visibility Outer Sheath, Self-Extinguishing Flame Retardancy, Multiple Core Configurations (1–36 cores), NSS 1000+ Hour Salt-Fog Corrosion Testing, MSHA/CE Hazardous-Location Approval, Port Crane and Container Terminal Engineering Integration): Comprehensive Advanced Polymer Materials Science and EPR Elastomer Stabilization Architecture Analysis Integrating Polymer Chain Engineering, Salt-Fog Degradation Resistance Mechanisms, Copper Shielding Electromagnetic Protection, Flexible Conductor Design, Environmental Stabilizer Chemistry, and Next-Generation Maritime Control System Integration Port automation environments—container gantry cranes (−35°C winter Arctic platforms, +80°C tropical heat), ship-to-shore electrical systems with persistent salt-fog atmosphere (NSS corrosion, ISO 12944 C5 marine rating), hazardous-location electrical distribution for dock loading/unloading systems, refrigerated container (reefer) terminal cabling with simultaneous cold exposure and salt-fog stress, festoon overhead power distribution for mobile port equipment (240 m/min speed, repetitive flexing), and maritime automation requiring electrical control cabling engineered to simultaneously achieve four competing performance objectives rarely optimized together: mechanical flexibility maintained across 115°C temperature envelope (−35 to +80°C), requiring advanced EPR insulation chemistry preventing brittleness at cryogenic port temperatures, comprehensive salt-fog corrosion resistance (NSS 1000+ hours per ASTM B117, requiring copper shielding and tinned-conductor electrochemical protection), ozone/UV environmental immunity (port dock sunlight exposure + industrial ozone from electrical switching), through molecular stabilization and phase-separated domain chemistry, and high-speed festoon dynamic service (240 m/min conductor motion, repetitive bending stress), demanding 4×D bending flexibility combined with tensile strength withstanding mechanical tension. Conventional port cables sacrifice either flexibility (rigid rubber becoming brittle at −35°C) or salt-fog resistance (unshielded copper corroding in salt atmosphere). FLEXIFESTOON® Maritime represents a breakthrough in EPR cable engineering, delivering simultaneous optimization across all four domains through proprietary advanced EPR insulation with polymer chain stabilization, copper tinned-conductor shielding providing electrochemical corrosion protection, flexible copper architecture enabling 240 m/min festoon service, and molecular-level stabilization chemistry suppressing salt-fog/ozone/UV degradation—enabling port engineers, terminal automation specialists, and maritime electrical systems integrators to deploy a unified next-generation cable solution across the complete spectrum of maritime, salt-fog, and high-speed dynamic environments while maintaining compliance with VDE 0250-813, MSHA hazardous-location, and NSS corrosion standards.

Technical Department

on20/05/2026

Why Do Reeling Cables Corkscrew?

"Corkscrew" is the colloquial term used by mining and construction equipment operators to describe an unwanted behavior observed when paying…

10 Min Read

FLEXIDRUM® MEDIUM SHD GC: Advanced Flexible Power Cable for Mobile Mining and Industrial Equipment Comprehensive technical engineering guide to FLEXIDRUM® MEDIUM SHD GC (2 kV to 25 kV AC power distribution cable), purpose-engineered for flexible installation on cable-reel systems, mobile mining equipment, longwall miners, loaders, drills, shovels, conveyors, pumps, and industrial machinery requiring simultaneous power delivery, ground conductor functionality, and ground-check monitoring across demanding extraction and materials-handling environments.

Technical Department

on20/05/2026

ICEA SHD-GC Ground Check Explained: Why It Matters in Open-Pit Mining

Open-pit mining presents a unique electrical safety environment that fundamentally differs from underground mining or conventional industrial…

10 Min Read

Large three-phase AC motors drove continuous-duty equipment (conveyor systems, pump stations, ventilation fans) with straightforward on/off control via contactor switches. The control circuits were simple, the equipment was robust and forgiving of electrical noise, and cable specifications focused purely on mechanical durability and basic electrical protection. Modern underground mining operations operate in a fundamentally different electrical environment. Variable frequency drives (VFDs) regulate motor speeds to match load requirements, reducing energy consumption and extending equipment life. Programmable logic controllers (PLCs) and distributed control systems (DCS) automate equipment sequencing and mine ventilation. Wireless monitoring systems track equipment health, environmental conditions, and safety parameters. The mine's electrical environment has become as electrically complex as an industrial manufacturing facility, except that everything must operate underground in the presence of conductive dust, moisture, and metallic ore particles that create unintended current paths and electromagnetic noise sources.

Technical Department

on20/05/2026

Understanding UNE 22513-1 (DS1N) Requirements for Underground Mines

Large three-phase AC motors drove continuous-duty equipment (conveyor systems, pump stations, ventilation fans) with straightforward on/off…

10 Min Read

AS/NZS 1802 (Australian/New Zealand Standard 1802) establishes the technical requirements for flexible mining cables used in underground and open-pit mining operations across Australia, New Zealand, and the broader Pacific region. Type 241 within this standard designates unarmoured flexible power cables rated at 0.6/1 kV with a Class 5 copper conductor, suitable for mobile mining equipment and drag cable applications. The standard was initially published in 1993 and has been progressively updated (most recently 2019) to incorporate advances in materials science and safety requirements. AS/NZS 1802 Type 241 employs a single-core earth architecture: the cable contains one dedicated protective earth conductor of specified cross-section, positioned at a fixed location within the cable cross-section (typically at the "6 o'clock" position relative to the three phase conductors at 12, 4, and 8 o'clock). This single-core design reflects a pragmatic engineering philosophy: the earth conductor is sized to carry fault currents, provide equipotential grounding for equipment frames, and enable protective relay operation in the event of phase-to-frame faults.

Technical Department

on20/05/2026

AS/NZS 1802 Type 241 vs. VDE 0250: Complete Earthing Differences Guide

AS/NZS 1802 (Australian/New Zealand Standard 1802) establishes the technical requirements for flexible mining cables used in underground and…

8 Min Read

Prysmian PROTOLON is a dedicated reeling cable product family manufactured specifically for ship-to-shore (STS) container cranes, rubber-tyred gantry (RTG) equipment, and fixed portal gantry cranes operating in port environments. The PROTOLON designation encompasses multiple voltage ratings and sheath variants optimized for the unique demands of container port operations: extreme torsional loading from reel wind/unwind cycles, exposure to saline spray and salt-laden atmospheres, exposure to direct ultraviolet radiation in open-air port environments, and continuous mechanical flexing over thousands of reel cycles. The cable is manufactured to IEC 60502-1 standards (identical to mining reeling cables) but with additional performance requirements specified in ISO 3384 (compression set limits), ASTM B117 (1000-hour salt fog resistance), and IEC 60811-2-2 (UV aging resistance). These additional requirements reflect the marine environment's specific hazards: salt fog causes accelerated outer sheath degradation in non-marine-optimized cables, and UV radiation polymerizes and hardens outer sheath materials, reducing flexibility and increasing brittleness over 5–8 year service periods.

Technical Department

on20/05/2026

Prysmian PROTOLON Reeling Cable Alternative for Port Authorities

Prysmian PROTOLON is a dedicated reeling cable product family manufactured specifically for ship-to-shore (STS) container cranes, rubber-tyred…

9 Min Read

Nexans PANZERFLEX is the commercial product designation for high-flexibility mining reeling cables manufactured to German (VDE 0250-813) and international (IEC 60502-1) specifications. The product line is aimed specifically at European and Latin American underground mining operations, where it commands the market leadership position for continuous miner, shearer, and shuttle car drag cables. PANZERFLEX is not a single cable specification but rather a family of products: PANZERFLEX-R for rubber-insulated designs, PANZERFLEX-P for PUR-sheathed designs, and variants distinguished by voltage rating (0.6/1 kV, 1.8/3 kV) and core configuration. (N)TSCGEWÖU is the German VDE cable designation that describes the same functional class: a 0.6/1 kV, Class 5 flexible copper conductor, EPR insulation, unarmoured cable suitable for mobile mining equipment. The "(N)" prefix indicates "new" or "current" specification, distinguishing it from obsolete predecessors. This designation is widely used in German, Austrian, and Central European mining specifications, particularly in coal mining where German equipment vendors historically dominated the market. Technically, PANZERFLEX and (N)TSCGEWÖU are designed to satisfy identical functional requirements and electrical performance levels. Both must pass IEC 60502-1 qualification testing, both are specified for 0.6/1 kV operation, both support Class 5 conductor architecture for maximum torsional flexibility, and both employ EPR insulation for mining durability. The designations differ only in nomenclature: one is a commercial product name from a multinational manufacturer, the other is a German standards designation used in technical specifications and procurement documents.

Technical Department

on20/05/2026

Nexans PANZERFLEX vs. (N)TSCGEWÖU: A Comprehensive Equivalent Guide

Nexans PANZERFLEX is the commercial product designation for high-flexibility mining reeling cables manufactured to German (VDE 0250-813) and…

10 Min Read

DM1N and 2M2N designations represent the apex of mining cable complexity — flexible armoured cables engineered for medium-voltage (1.8/3 kV, 3.6/6 kV) mobile equipment operating in the most mechanically extreme underground environments. These cables are specified for longwall coal shearers, hydraulic drill jumbos, and other continuous-operation mobile equipment that simultaneously demand ultra-high mechanical durability and medium-voltage electrical capability. The fundamental engineering challenge that defines DM1N/2M2N is this: medium-voltage cables require internal semi-conductive layers and sophisticated insulation architecture to prevent corona discharge (electrical breakdown at high voltage), but they must simultaneously maintain the extreme mechanical flexibility required for cable reel winding and equipment drag duty. This convergence is far more difficult than it might appear, because the semi-conductive layers and additional insulation walls that prevent corona also inherently reduce mechanical flexibility and increase cable stiffness.

Technical Department

on20/05/2026

DM1N/2M2N Flexible Armoured Mining Cable

DM1N and 2M2N designations represent the apex of mining cable complexity — flexible armoured cables engineered for medium-voltage (1.8/3 kV,…

10 Min Read

DS1N (also designated UNE 22513-1) represents an evolved generation of mining cable technology designed specifically for environments where electromagnetic interference (EMI) and signal integrity are as critical as mechanical durability. The standard specifies cables that combine the proven mechanical robustness of UNE 22511/22512 designs with the electromagnetic shielding technology required for control systems, signal circuits, and power distribution in complex underground installations. The defining characteristic of DS1N is the integration of a metal braid shield — typically tinned copper wire woven at high density around the cable core — combined with a symmetric earth architecture (3×S1 + 3×S2 distribution) that provides both electrical protection and mechanical balance. This combination addresses a critical operational requirement in modern mining: reducing noise and crosstalk in environments where control signals must coexist with high-power switching equipment, variable frequency drives, and long distribution runs to remote equipment.

Technical Department

on20/05/2026

Type DS1N Mining Cable

DS1N (also designated UNE 22513-1) represents an evolved generation of mining cable technology designed specifically for environments where…

10 Min Read

UNE 22512 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV y 0,6/1 kV con aislamiento de caucho, con armadura" (Flexible cables for underground mining, rubber-insulated, armoured) — exists as a parallel but fundamentally distinct standard from its unarmoured sibling UNE 22511. Where UNE 22511 is engineered as a torsion-optimized drag cable for mobile equipment, UNE 22512 is engineered as a crush-and-cut protected feeder cable for semi-fixed installations where mechanical damage from external forces (falling rock, equipment impact, floor pressure) is a documented operational risk, but the extreme torsional loading of continuously moving equipment is not. The addition of metallic armour — specifically, galvanized steel wire braid forming what the standard designates as M2 GSWB — is the defining structural choice that reshapes every downstream design decision in the cable. The armour is not merely a protective layer added to an otherwise standard cable; rather, it fundamentally alters the cable's mechanical behavior, installation requirements, cost structure, and applicable fatigue loading regimes. Understanding UNE 22512 therefore requires understanding not just what the armour is, but why its presence necessitates a completely different engineering philosophy compared to unarmoured cables. The standard was developed by AENOR (Asociación Española de Normalización y Certificación) to address a specific operational problem encountered in Spanish and Latin American underground mining installations. While drag cables experience cyclic torsional loading as the controlling mechanical stress, semi-fixed installation cables experience something categorically different: static or low-cycle crushing and cutting stresses from external impacts, combined with continuous exposure to abrasive underground surfaces and sharp rock edges. A cable optimized exclusively for torsional fatigue — such as UNE 22511 — when installed in a semi-fixed route subject to crushing and cutting, experiences mechanical failure not through fatigue mechanisms but through acute sheath penetration, insulation damage, and moisture ingress. Conversely, an armoured cable optimized for crush protection, if inappropriately installed in a drag duty application, fails not through crushing (which the armour prevents) but through torsional fatigue of the armour wires themselves — a more insidious failure mode that occurs entirely within the armour structure, invisible until complete armour failure exposes the underlying insulation.

Technical Department

on19/05/2026

DM2N 3×150+3×25+3×2,5 0,6/1 kV SW HD

UNE 22512 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV y 0,6/1 kV con aislamiento de caucho, con…

14 Min Read

What Are UNE 22560 and UNE 22561? Scope, Definitions, and Core Purpose The UNE 22560 and UNE 22561 standards represent the final and often most underestimated element of the Spanish and Latin American underground mining cable ecosystem. Where UNE 22511 and UNE 22512 govern the power distribution cables that energize mining equipment, the 22560 and 22561 standards govern the signal, control, and interlock cables that command and protect that equipment. These are the "nervous system" cables of a mine — the communication network that tells a continuous miner when to advance and when to halt, that triggers emergency stops, that monitors hoisting rope tension on shaft equipment, that controls conveyor sequencing, and that enables the protective interlocking that prevents a piece of equipment from operating unless all safety preconditions are met. UNE 22560 formally defines flexible multi-core cables for underground mining with voltage ratings up to 500 V or 0.6/1 kV, with no metallic armour protection — designed for installation within equipment enclosures, along protected cable trays in main gate roads, or in areas where mechanical damage risk is minimal. UNE 22561 is its armoured sister standard, incorporating steel wire braid or steel tape protection, specified for installation in rough terrain areas where mechanical damage from rock fall, equipment collision, or floor contact is a credible risk. Both standards mandate that the cable be designed as a multi-core concentric stranded bundle — not the parallel-laid three or four conductors common in power cables, but rather seven, twelve, nineteen, or more individually insulated cores twisted concentrically around a central axis, allowing compact packaging of numerous independent control circuits within a single cable jacket. The distinction between these standards is not merely mechanical armour presence or absence. Control cables are tested against an entirely different set of safety criteria than power cables because their failure mode is fundamentally different. A power cable failure results in loss of energy to equipment — dangerous but localized. A control cable failure can disable the interlock system that prevents a continuous miner from advancing into unsafe ground, or can disable the emergency stop circuit that should halt a conveyor if a worker falls into it. A control cable fire, burning in a tightly bundled cable tray with other control cables, must not spread flame between cables because control cables are typically routed in shared ducts and cable carriers where one cable's ignition could cascade to adjacent circuits. Therefore, control cables are tested for bundle flame propagation (EN 60332-3) rather than single-cable flame propagation tests — a more stringent requirement that demands careful attention to outer sheath formulation and cable spacing in bundle installation.

Technical Department

on19/05/2026

UNE 22560

What Are UNE 22560 and UNE 22561? Scope, Definitions, and Core Purpose The UNE 22560 and UNE 22561 standards represent the final and often…

26 Min Read

Marine & Port Drag Cable — High-Flexibility Saltwater-Resistant System A comprehensive engineering dissection of heavy-duty marine drag cables for port equipment, container terminals, and offshore platforms — from conductor architecture and EPR insulation to steel wire armour (M2) design rationale, galvanic corrosion protection mechanisms, environmental compliance, and validated performance benchmarking against Nexans Eproneo Port and Prysmian marine systems.

Technical Department

on19/05/2026

UNE 22512

Marine & Port Drag Cable — High-Flexibility Saltwater-Resistant System A comprehensive engineering dissection of heavy-duty marine drag cables…

17 Min Read

UNE 22511, published and maintained by AENOR (Asociación Española de Normalización y Certificación), is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Operating as a specialized overlay on IEC 60502-1, it extends that base standard's electrical requirements with stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys adoption across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables.

Technical Department

on19/05/2026

UNE 22511

UNE 22511, published and maintained by AENOR (Asociación Española de Normalización y Certificación), is the definitive Spanish standard for…

29 Min Read

$UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura" (Flexible cables for underground mining, 1.8/3 kV, rubber-insulated, unarmoured) — is the definitive Spanish standard for heavy-duty power cables connecting underground mobile mining equipment to fixed electrical distribution networks. Published and maintained by AENOR (Asociación Española de Normalización y Certificación), it operates as a specialized overlay on IEC 60502-1, extending that base standard's electrical requirements with the stringent mechanical, safety, and flame-retardancy requirements specific to enclosed underground environments. Despite its Spanish origin, UNE 22511 enjoys a geographic reach far exceeding Iberia. The standard has been adopted — formally or by reference — across the major Spanish-speaking mining economies: Chile, Peru, Colombia, Bolivia, and Mexico, where AENOR-certified cables are accepted by national mining safety regulators as the primary qualification pathway for underground mobile equipment power supply cables. In Chile alone, UNE 22511 cables are installed across dozens of operations including major copper and coal mines. The standard's engineering DNA can be described in a single imperative: extreme dynamic flexibility combined with superior resistance to combined torsional and bending fatigue. This is not merely a performance aspiration — it is a structural requirement that shapes every material choice and geometric decision in the cable's construction. The logic proceeds as follows: Underground mobile equipment (continuous miners, shearers, shuttle cars) moves continuously and repeatedly during operation, dragging its power cable behind it or winding and unwinding it from a cable reel. This motion imposes cyclic bending, axial tension, and torsional loads on the cable simultaneously — a multi-axis fatigue regime of a severity not encountered in any other industrial cable application. Standard fixed-installation cables, even those classified as "flexible," are not designed for this loading regime and will fail in fatigue within weeks to months when installed in drag duty. Therefore, every structural element of a UNE 22511 cable — conductor wire diameter, insulation compound, earth core geometry, armour exclusion, sheath specification — is selected to maximize multi-axis fatigue endurance, not any single performance parameter. ⛏ The Founding Engineering Principle UNE 22511 is an unarmoured drag cable standard. The deliberate absence of any metallic armour — which might superficially seem to reduce robustness — is in fact the defining engineering choice that makes the standard viable. Steel wire or tape armour in a continuously torsionally-loaded cable acts as a progressive-failure torsional spring: each twist cycle accumulates irreversible plastic strain in the armour wires, leading to wire fractures within 10,000–30,000 cycles. For a shuttle car cable experiencing 80,000+ torsional cycles per year, armour represents not additional protection but a built-in scheduled failure mechanism. The UNE 22511 design eliminates this failure mode at source.$

Technical Department

on19/05/2026

UNE 22511 Mining Cable

UNE 22511 — formally titled "Cables flexibles para minería subterránea con tensiones de 1,8/3 kV con aislamiento de caucho, sin armadura"…

24 Min Read

UNE 22511 Design Philosophy: Ultimate Flexibility for Underground Mobile Equipment Within the taxonomy of mining cables, the distinction between the UNE 22511 and UNE 22512 standards represents a fundamental divergence in design philosophy — not merely a difference in specification parameters. Understanding this divergence is essential for engineers procuring replacement cables for underground coal mines in Spain, Chile, Colombia, and other markets operating under the AENOR (Asociación Española de Normalización y Certificación) regulatory framework. The UNE 22511 standard governs cables for flexible connection of mobile underground mining machinery — the specific class of heavy-duty cable designed for equipment that moves continuously during operation: continuous miners, longwall shearers, shuttle cars, and cable reel systems. The engineering DNA of a UNE 22511 cable can be summarized in a single phrase: engineered for mechanical endurance, not for static installation security. This philosophy manifests in every structural element of the cable: the conductor class, the insulation compound, the earth core arrangement, the absence of metallic armor, and the sheath compound selection. Each element is chosen not to maximize any single parameter but to achieve an optimal balance of torsional resilience, bending flexibility, and sheath durability under the combined mechanical loading of continuous dragging, occasional running-over by shuttle car wheels, and periodic full-tension pulling by cable reel drum systems.

Technical Department

on19/05/2026

UNE 22511

UNE 22511 Design Philosophy: Ultimate Flexibility for Underground Mobile Equipment Within the taxonomy of mining cables, the distinction…

4 Min Read

PV-FLAT H05VVH6-F/LIFT is engineered for one of the most demanding electrical environments on Earth: nuclear power plants and high-radiation medical imaging facilities. Unlike standard cables, which degrade rapidly when exposed to ionizing radiation, this cable withstands 80 mrad (80 million rads) of cumulative radiation dose—equivalent to 20+ years in a high-radiation zone. Nuclear and medical facility elevators operate in harsh radiation environments where: Gamma radiation (¹³⁷Cs, ⁶⁰Co sources)—degrades polymer chains in cable insulation, causing brittleness and electrical breakdown Neutron radiation (from reactor cores)—causes atomic transmutation in copper conductors, increasing electrical resistance X-ray radiation (medical imaging rooms, CT scanners)—accelerates polymer cross-linking, reducing mechanical flexibility Extreme temperature cycling (−40°C cryogenic zones to +80°C during equipment failure scenarios) Hydrogen generation (from reactor cooling water radiolysis)—corrosive to standard insulation compounds The PV-FLAT's parallel-core flat architecture is specifically designed for confined elevator cable routing in nuclear containment buildings and medical facility basements, where space is extremely limited and cable management is critical for safety systems.

Technical Department

on17/05/2026

PV-FLAT H05VVH6-F/LIFT

PV-FLAT H05VVH6-F/LIFT is engineered for one of the most demanding electrical environments on Earth: nuclear power plants and high-radiation…

4 Min Read

Hybrid Cable Innovation: Dual-Voltage Architecture for Building Lifts The FLEXIDRUM® BASKET LIFT 731 represents a revolutionary engineering approach to hoisting cables for building construction lifts. Unlike traditional single-voltage cables that require separate control and power conductors, the 731 integrates dual-voltage capability (300/500V control + 0.6/1kV power) into a single hybrid structure. This hybrid design is specifically engineered for modern building hoist systems operating in construction environments, where: Control circuits (300/500V) manage speed control, safety interlocks, load monitoring, and emergency descent systems Power circuits (0.6/1kV) drive the main hoist motor (typically 15–50 kW capacity) Single cable run simplifies installation—no separate routing for control vs. power, reducing labor costs ~30% Space efficiency eliminates need for dual-cable management on building facades Safety redundancy through separate insulation layers ensures control circuit failure doesn't disable power monitoring The BASKET LIFT 731's architecture is distinctly different from port crane cables (SPREADER 740/750) and terrestrial industrial cables, reflecting the unique requirements of vertical construction lift systems where personnel safety depends on reliable signal transmission alongside high-power motor control.

Technical Department

on17/05/2026

BASKET LIFT 731

Hybrid Cable Innovation: Dual-Voltage Architecture for Building Lifts The FLEXIDRUM® BASKET LIFT 731 represents a revolutionary engineering…

3 Min Read

BASKET SPREADER 750: Next-Generation Hoisting Cable Architecture The BASKET SPREADER 750 (3GSLTOE) represents a fundamental advancement in hoisting control cable design, specifically engineered for next-generation automated port crane systems operating under extreme environmental and operational constraints. Unlike the BASKET SPREADER 740's 300/500V AC specification, the 750 operates at 0.6/1kV AC with dual-voltage DC capability (0.9/1.8 kV)—a classification shift that enables: Higher power capacity – 2–3× greater amperage per conductor, enabling longer cable runs with lower voltage drop Medium-voltage infrastructure compatibility – Direct integration with port substation power distribution systems (0.6 kV = 600V three-phase industrial standard) DC dual-voltage operation – Simultaneous support for AC motor control and DC feedback/signaling circuits (0.9/1.8 kV DC margins) Extreme temperature capability – Operating range −50°C to +80°C (vs. SPREADER 740's −20°C to +60°C), addressing Arctic port terminals and tropical high-ambient scenarios Advanced insulation chemistry – GAALTHERM® 530 thermoplastic compound replaces standard PVC/PUR, delivering superior chemical resistance and thermal stability This cable bridges the gap between standard control cables (300/500V, limited temperature) and heavy industrial medium-voltage distribution cables, creating a purpose-built solution for modern automated gantry crane systems in global port terminals.

Technical Department

on17/05/2026

3GSLTOE

BASKET SPREADER 750: Next-Generation Hoisting Cable Architecture The BASKET SPREADER 750 (3GSLTOE) represents a fundamental advancement in…

3 Min Read

BASKET SPREADER 740 (YSLTOE) is engineered specifically for hoisting and control applications where mechanical flexibility and electrical reliability must coexist in marine environments. Unlike load-bearing structural cables (which prioritize tensile strength), control cables emphasize: Conductor flexibility – Repeated bending over pulleys without mechanical fatigue Insulation integrity – Voltage breakdown resistance under salt-fog corrosion Mechanical damping – Rope-like flexibility to drape naturally in spreader bar frames Environmental barrier – Outer sheath blocks salt, moisture, and UV penetration Core Design Elements: Component Material Specification Function Port Environment Benefit Conductor Flexible red copper Class 6 (IEC 60228) Carries 300/500V power; enables bending flexibility High purity copper resists galvanic corrosion Insulation PVC type YI2 (IEC 60811) Electrical isolation; voltage breakdown resistance (2 kV test) PVC with marine additives prevents salt-induced tracking Central Unit Aramide yarns (Kevlar™ equivalent) Mechanical load-bearing backup; structural integrity Aramide resists moisture & salt; absorbs vibration stress Outer Sheath PUR type 11YM1 (DIN 73377) Environmental barrier; UV/ozone/moisture protection Superior salt-fog resistance; 20+ year marine lifespan

Technical Department

on17/05/2026

YSLTOE

BASKET SPREADER 740 (YSLTOE) is engineered specifically for hoisting and control applications where mechanical flexibility and electrical…

3 Min Read

Spreader Bar Cable Application: What is a spreader bar? Container crane context: Gantry crane positioned at dock Overhead hoist mechanism: Winch + trolley system Spreader bar: Attachment point below hoist Function: Grips container corners, distributes load, tilts container for placement Spreader bar structure: Framework: Steel tubes/beams forming rectangular frame Lifting points: 4 corner attachment rings (one per container corner) Electrical system: Motor-driven locks, position sensors, lighting Cables: Power supply for motors + control signals for locking mechanism Cable location (spreader bar): Vertical run (primary): From crane hoist (top) down 20–40 m to spreader bar (bottom) Function: Supply power for: - Corner lock solenoids (release container locks) - Position feedback sensors (confirm locks engaged) - Optional: Spreader bar lighting (visibility during operation) Simultaneous function: Act as partial mechanical support (share load with main hoist cable) Horizontal distribution (on spreader bar): From entry point distributed across spreader frame Supply all four corner lock motors Branching: May split into smaller branches (4× circuits to corners) Mechanical load: Cable must withstand: Static tension: Weight of container payload (20–40 tons distributed) Dynamic loads: Jerking during load acceleration, swinging in wind Thermal: Tropical port environment, direct sun, saltwater spray Abrasion: Rubbing against spreader frame during operation Cable design philosophy: Dual function (unique): Electrical function: Deliver 300/500V power for locking system Mechanical function: Share load-bearing (not primary structure, but support role) Different from: Pure electrical cables (festoon, lifting): Electrical function only Pure mechanical ropes: Mechanical function only BASKET SPREADER 730: Both functions integrated Speed specification rationale: 160 m/min (relatively slow): Container crane cycle time: ~45–60 seconds per lift Descent distance: 20–40 m Descent speed: 20–40 m ÷ 45–60 sec = 0.33–0.9 m/s = 20–54 m/min Average speed: ~30 m/min (loading) + 20 m/min (discharge) = 25 m/min 160 m/min specification: 6–8× safety margin on speed Design: Allows for fast emergency ascent if needed Why not higher speed? Mechanical load constraint: Heavy cable (4000 N = ~400 kg equivalent) Inertia: Accelerating 400 kg + spreader bar + container inertia takes time Structural: Crane frame limits acceleration rates (safety interlocks) Result: 160 m/min is practical maximum for loaded spreader bar

Technical Department

on15/05/2026

BASKET SPREADER 730

Spreader Bar Cable Application: What is a spreader bar? Container crane context: Gantry crane positioned at dock Overhead hoist mechanism:…

7 Min Read

Design Comparison (LIFT-1S UL vs. LIFT-2S UL): LIFT-1S UL: Temperature: 105°C (highest rating) Steel cores: 1 (single mechanical support) Redundancy philosophy: Electrical backup (dual control circuits) Yellow sheath: No (black) Insulation: PVC only (100% pure) Mylar wrap: No Size example (8G1.5): ~21.5 mm OD Cost: Higher (premium 105°C formulation) Best for: High-temperature machine rooms, non-HVAC spaces LIFT-2S UL: Temperature: 90°C (moderate rating) Steel cores: 2 (dual mechanical support) Redundancy philosophy: Mechanical backup (if one core fails, other works) Yellow sheath: Yes (RAL 1021, safety identification) Insulation: PVC/Nylon hybrid (enhanced protection) Mylar wrap: Yes (additional conductor protection) Size example (8G1.5): ~22.7 mm OD (slightly larger due to dual cores) Cost: Moderate (balanced design) Best for: Standard elevator duty, mechanical redundancy required Philosophy difference: LIFT-1S UL approach: "Design the cable to never overheat" - Optimize for high temperature (105°C possible) - Single mechanical core (simpler, lighter) - Control circuit provides electrical safety backup - Assumes: Machine room temperature controlled (or naturally cool) - Risk: If machine room exceeds 90°C ambient, marginal safety LIFT-2S UL approach: "Design for mechanical redundancy + moderate conditions" - Accept standard 90°C temperature (sufficient for most installations) - Dual mechanical cores (if one damaged/broken, other maintains function) - Better long-term reliability (don't rely on control circuit for mechanical failure) - Assumes: Some machines rooms may exceed 80°C, but not 90°C - Benefit: Fail-safe mechanical backup (independent of electrical system) Application selection: Choose LIFT-1S UL if: ✓ Machine room is non-air-conditioned, exposed to sun ✓ Building has no climate control in elevator shaft ✓ Located in tropical climate with extreme heat ✓ Temperature analysis shows >85°C sustained possible ✓ Willing to pay premium for 105°C rating Choose LIFT-2S UL if: ✓ Standard commercial elevator in air-conditioned building ✓ Mechanical redundancy more important than temperature headroom ✓ Budget-conscious (LIFT-2S UL lower cost than LIFT-1S UL) ✓ Temperature typically

Technical Department

on15/05/2026

LIFT-2S UL

Design Comparison (LIFT-1S UL vs. LIFT-2S UL): LIFT-1S UL: Temperature: 105°C (highest rating) Steel cores: 1 (single mechanical support)…

9 Min Read

LIFT-2S (European) vs. LIFT-1S UL (North American): LIFT-2S characteristics: Voltage: 300/500V (European standard, lower voltage) Temperature: −40°C to +70°C (moderate range) Standards: VDE 0482 part 265-2-1, EN 50265-2-1, IEC 60332-1-2 Design philosophy: Safety by material redundancy (2 steel cores) Steel cores: 2× cores provide mechanical backup Conductor: Class 6 (European, ~150–200 wires per mm²) Cost: Lower (proven European manufacturing) Market: Europe, Asia-Pacific, most of world LIFT-1S UL characteristics: Voltage: 600V (North American standard, higher voltage) Temperature: −25°C to +105°C (extreme range, high-temp optimized) Standards: UL 2562, UL 62, CSA C22.2 No.210.2 Design philosophy: Safety by certification (single core + redundant control) Steel core: 1× core (sufficient with nylon covering) Conductor: Class M (UL, extra fine ~300+ wires per mm²) Cost: Higher (UL testing, certification documentation) Market: North America (USA, Canada), Mexico UL 2562 specialty certification: UL 2562 scope: Elevator and Dumbwaiter Cables Specific requirements: 1. Pendant cable design (cable hangs freely, no duct support) 2. Vertical orientation (designed for gravity-loaded suspension) 3. Repeated flex cycles (cable moves up/down frequently) 4. Safety-critical function (failure = personnel risk) Consequence: More stringent than general-purpose cables Testing includes: Bend cycle fatigue, heat aging, compression resistance Test procedures (unique to UL 2562): Bend cycle test: 1,000+ cycles at minimum bending radius Cable must pass insulation resistance after cycling Heat aging: 500+ hours at 105°C continuous Tensile strength retention minimum 70% Compression: 1,000+ hours under sustained compression Cable cross-section must not exceed 5% permanent deformation LIFT-2S (no UL 2562): Tests per VDE are less stringent on fatigue/cycling Assumes cable mostly static, not repeated flex Adequate for European elevator duty (lower speed, fewer cycles) LIFT-1S UL: All UL 2562 tests passed (proven for North American elevators) Faster cycle times, more frequent motion → more fatigue stress Extra testing ensures reliability under North American elevator duty Market requirement (regulatory): Europe/International: CE mark required (European conformity) VDE/EN/IEC standards sufficient No UL certification needed (not recognized in EU) LIFT-2S is sufficient North America (USA, Canada): UL certification mandatory for elevators UL 2562 specifically for elevator cables CSA dual certification required in Canada LIFT-2S NOT acceptable (lacks UL 2562) LIFT-1S UL mandatory Cost implication: UL certification: ~$5,000–15,000 per product per region Testing duration: 3–6 months per model Documentation: Comprehensive test reports, technical files Result: LIFT-1S UL 20–30% higher cost than equivalent European cable

Technical Department

on15/05/2026

LIFT- 1S UL

LIFT-2S (European) vs. LIFT-1S UL (North American): LIFT-2S characteristics: Voltage: 300/500V (European standard, lower voltage) Temperature:…

1 Min Read

Lifting Cable vs. Festoon Cable: Festoon cable (FLEXIFESTOON series): Primary stress: Repeated bending at 4–6×D radius Speed: 60–240 m/min continuous reeling Bending cycles/year: 10–100 million cycles Insulation: Soft, highly flexible (TPE, EPR) Material: Rubber or PUR outer sheath (elastic) Design goal: Maximize fatigue life under bending Service life: 5–15 years (fatigue-limited) Cost: Moderate (commodity materials) LIFT-2S lifting cable: Primary stress: Sustained vertical tensile load Speed: Static (or very slow vertical movement) Bending cycles/year:

Technical Department

on15/05/2026

LIFT-2S

Lifting Cable vs. Festoon Cable: Festoon cable (FLEXIFESTOON series): Primary stress: Repeated bending at 4–6×D radius Speed: 60–240 m/min…