Reeling & Trailing Cables For Cranes & Mining — Feichun Special Cable Blogs - Explore Feichun's Expert Solutions For Reeling Cables Used In Cranes And Ship Unloaders, And Trailing Cables For Mining. Our Blog Shares Technical Insights And Product Information To Ensure High Performance And Safety In Demanding Industrial Environments.

28 Min Read

Modern industrial lifting and material handling equipment operates under increasingly stringent design constraints. Gantry cranes in container yards must span wider distances with reduced structural weight. Ship-to-shore (STS) cranes must achieve higher transfer speeds without exceeding motor power budgets. Mining draglines must extend to greater heights while maintaining cable reeling capacity within physically constrained drum widths. In each of these scenarios, the reeling cable becomes a critical design bottleneck. The cable must simultaneously deliver high electrical current (high ampacity), fit within limited spatial envelopes (constrained outer diameter), maintain mechanical strength for decades of cyclic loading, and remain cost-competitive against alternative designs. These competing requirements have historically forced engineers into uncomfortable compromises: oversizing conductors to achieve required ampacity while accepting larger outer diameters and additional weight, or accepting reduced ampacity and undersizing equipment performance. XLPE (cross-linked polyethylene) insulated cable technology breaks this compromise by fundamentally altering the physics of electrical insulation, enabling smaller outer diameters and higher ampacity at equivalent mechanical performance levels. Understanding when this technology delivers genuine advantage versus when traditional elastomeric designs remain optimal requires careful analysis of the underlying physics and realistic comparison of total system performance.

on26/02/2026

(N)GRXGöu vs. NSHTÖU: When to Use XLPE-Insulated Reeling Cables Over Standard EPR Insulation for Higher Ampacity

Modern industrial lifting and material handling equipment operates under increasingly stringent design constraints. Gantry cranes in container…

Discover More

24 Min Read

Slag transfer cars represent one of the most thermally demanding applications in modern industrial operations. In an integrated steel mill, molten slag—a byproduct of iron ore reduction and steel refining processes—emerges from the blast furnace or electric arc furnace at temperatures approaching 1,400 to 1,600°C. This extremely hot slag must be transported from the furnace area to cooling and processing areas, sometimes over distances of 50 to 200 meters. The slag pots or ladles are suspended from overhead cranes and transferred between station points via specialized transfer cars, which are essentially motorized flatbed vehicles that roll on rails beneath the suspended load. The reeling cable that powers the electromagnetic magnet holding the slag pot, or that supplies power to the transfer car's motor and control systems, is exposed to radiant heat from the slag pot itself, heated air rising from the slag, and ambient air that may be heated to 80 to 100°C by the nearby furnace operations. The cable must operate continuously—sometimes 18 to 24 hours per day—in this thermal environment without failure, while simultaneously handling the mechanical stresses of starting and stopping a 100+ ton load, acceleration forces, and repeated coiling and uncoiling on the transfer car's reel system. 渣罐转运设备代表现代工业运营中最具热挑战性的应用之一。在综合钢厂中，熔融渣（铁矿石还原和钢精炼工艺的副产品）从高炉或电弧炉产生的温度接近1,400至1,600°C。

Technical Department

on26/02/2026

Slag Transfer Cars: Heat-Resistant Reeling Cables (Up to 120°C) for Steel Mill Transfer Operations

Slag transfer cars represent one of the most thermally demanding applications in modern industrial operations. In an integrated steel mill,…

Discover More

26 Min Read

Scrap metal recycling yards represent one of the most mechanically punishing environments for industrial electrical cables. Unlike controlled manufacturing facilities or even mining operations where equipment operates within defined parameters and spaces, scrap yards combine continuous mechanical abuse, unpredictable sharp debris, contamination with oils and cutting fluids, and the psychological pressure of near-zero downtime expectations. An electromagnet suspended from a reeling cable must lift payloads of 20 to 40 metric tons repeatedly throughout the day, while the cable itself is dragged across jagged metal shards, torn aluminum siding, concrete floors embedded with sharp steel fragments, and rusted edge conditions that would immediately puncture or notch a conventional rubber sheath. When a notch forms on a neoprene (CR) cable—which happens within weeks in aggressive scrap environments—the material's inherent brittleness means that continued mechanical flexing and abrasion at that point of weakness leads to catastrophic tearing and complete cable failure. Polyurethane (PUR) cables like LAPP ÖLFLEX® CRANE PUR were specifically engineered to resist this exact failure mode through fundamentally different material physics.

Technical Department

on26/02/2026

LAPP ÖLFLEX® CRANE PUR vs. Neoprene (CR): Is Polyurethane Really Superior for Scrap Yard Lifting Magnet Cables?

Scrap metal recycling yards represent one of the most mechanically punishing environments for industrial electrical cables. Unlike controlled…

Discover More

22 Min Read

$A bucket wheel excavator is a remarkable piece of mining equipment: a massive rotating wheel fitted with buckets that continuously scoops material from a mining face, lifts it high into the air, and deposits it onto a conveyor system. The electrical cables that power such equipment face challenges that are fundamentally different from the cables used in stationary equipment or even in traditional draglines and shovels. As the main bucket wheel rotates continuously — sometimes for 12 to 20 hours per day — the flexible power cables that deliver electricity to drive motors must rotate with the wheel while simultaneously being wound and unwound through the cable reel system that connects the mobile equipment to the fixed power supply. This simultaneous rotation and reeling creates torsional stress — twisting force — that attempts to spiral the cable around its own axis. A standard single-sheath cable, designed primarily to withstand tension and bending, will gradually degrade under this torsional loading, with internal conductors ultimately fracturing and failing. A properly designed double-sheath cable with an anti-torsion braid can withstand decades of this continuous torsional punishment without degradation. Understanding why this distinction matters is the key to extending cable life and preventing expensive equipment failures.$

Technical Department

on26/02/2026

(N)TSKCGEWÖU Double-Sheath Design: Why Anti-Torsion Braid is Critical for Bucket Wheel Excavators

A bucket wheel excavator is a remarkable piece of mining equipment: a massive rotating wheel fitted with buckets that continuously scoops…

Discover More

26 Min Read

Deep underground mining operations depend on sophisticated systems for moving workers, equipment, and materials between the surface and mining zones that may be hundreds of meters below ground level. One of the most critical systems in these operations is the basket or cage suspension system that safely lowers and raises workers and cargo through vertical mine shafts. These systems rely on flexible (N)SHTÖU cables to deliver electrical power for lighting, ventilation, and communication equipment in the basket, while the mechanical support for the basket itself is provided by separate wire ropes or cables. The electrical cables must be suspended alongside the main support ropes, and this suspension relies on devices called mesh grips — specialized clamping devices that gently but firmly grip the cable without damaging its insulation or internal conductors.

Technical Department

on26/02/2026

(N)SHTÖU (Vertical): Selecting the Right Mesh Grip Size for Mine Shaft Basket Cables

Deep underground mining operations depend on sophisticated systems for moving workers, equipment, and materials between the surface and mining…

Discover More

12 Min Read

The critical difference between NSHTÖU-J and NSHTÖU-O is whether this safety pathway is provided within the cable itself. Understanding this distinction is not merely an academic exercise in cable naming conventions — it is a matter of worker safety that requires proper engineering knowledge to implement correctly.

Technical Department

on26/02/2026

NSHTÖU-O vs. NSHTÖU-J: The Green/Yellow Earth Conductor in Mining Hoists

The critical difference between NSHTÖU-J and NSHTÖU-O is whether this safety pathway is provided within the cable itself. Understanding this…

Discover More

28 Min Read

When electrical engineers and equipment operators discuss the capacity of a dragline or shovel reeling cable, they often refer to a specification that seems disconnected from the typical electrical characteristics — the maximum permissible tensile load, expressed in units of pounds per thousand circular mills (lbs/mcm). This specification is fundamentally different from ampacity (which measures the cable's ability to safely carry electrical current) or voltage rating (which specifies the insulation quality). Instead, tensile load capacity describes the maximum mechanical force that the cable can withstand before the metallic conductors themselves begin to yield, stretch, or break. For a reeling cable used on heavy dragline or shovel equipment, this mechanical specification is often more critical to equipment safety and service life than the electrical specifications, because the cable is typically exposed to enormous pulling forces that can exceed the weight of the equipment being supported.

Technical Department

on26/02/2026

Type SHD-GC (Reeling): Maximum Permissible Tensile Load for Heavy-Duty Dragline Cable Reels

When electrical engineers and equipment operators discuss the capacity of a dragline or shovel reeling cable, they often refer to a…

Discover More

AS/NZS 1802 - Reeling cables for underground mining

30 Min Read

$A stacker-reclaimer at a Newcastle coal export facility began experiencing intermittent loss of load cell signals, causing the control system to alarm and sometimes force the equipment into manual operation. Initial inspection found no obvious cable damage, and preliminary multimeter continuity tests showed the pilot conductors intact. However, when the equipment was operated at full speed during testing, the pilot conductor resistance measurement jumped from approximately 8 ohms to 45 ohms, demonstrating clear intermittency. A TDR test located the fault at approximately 450 meters along a 600-meter cable run. Detailed microscopic analysis of a cable section removed from the fault location revealed fatigue-induced microfractures in multiple copper strands within the pilot core. The root cause was identified as excessive vibration from poorly lubricated reeling drum bearings. The cable was successfully spliced at the fault location using a mid-cable connector kit, and bearing maintenance was performed to address the underlying vibration problem. The repaired cable has since operated successfully for over three years without additional pilot core failures.$

Technical Department

on26/02/2026

AS/NZS 1802 Type 440: Troubleshooting Pilot Core Continuity Failures on Long-Travel Stacker-Reclaimer Reeling Drums

A stacker-reclaimer at a Newcastle coal export facility began experiencing intermittent loss of load cell signals, causing the control system…

Discover More

21 Min Read

Australia's iron ore ports operate under some of the world's most challenging environmental conditions for electrical equipment. Along the western coast where iron ore handling facilities concentrate — particularly in the Pilbara region and ports such as Port Hedland and Port Dampier — outdoor equipment is exposed to intense ultraviolet (UV) radiation, salt spray, high humidity, and atmospheric ozone generated by photochemical reactions in the air. Unlike mechanical damage, which operators can see and immediately respond to, UV and ozone degradation of cable outer sheaths occurs invisibly and progressively, weakening the insulation and mechanical integrity of trailing and reeling cables over months or years until catastrophic failure occurs. A 22 kV reeling cable serving a quayside crane, electric rope shovel, or dragline in an Australian iron ore port may spend 80 to 100 percent of its operational life outdoors, unshaded, with only brief periods of protection during maintenance shutdowns or storage. Prysmian Group and other leading cable manufacturers have documented that in tropical and subtropical coastal environments, conventional black polychloroprene (PCP) or chlorinated polyethylene (CPE) sheaths can lose 30 to 50 percent of their original tensile strength within 12 to 24 months of continuous outdoor exposure, while tearing energy and elongation-at-break characteristics degrade even more rapidly. This degradation directly translates to increased risk of cable cracking, puncture, and sheath failure during flexing, dragging, or impact — precisely the stresses experienced by reeling cables on active port machinery. 在澳洲铁矿港口，传统PCP或CPE护套的抗拉强度可在12至24个月内下降30至50%。

Technical Department

on26/02/2026

Protolon® (SM) vs. Type 450: Which 22kV Reeling Cable Offers Superior UV and Ozone Resistance for Australian Iron Ore Ports?

Australia's iron ore ports operate under some of the world's most challenging environmental conditions for electrical equipment. Along the…

Discover More

27 Min Read

For the past several decades, industrial equipment operators have maintained strict separation between two completely different cable systems: power cables to deliver electrical energy, and data/communication cables to transmit control signals, telemetry, and monitoring information. A large mining excavator, for example, might require a 50 mm² power trailing cable and a separate, smaller-diameter communication cable running in parallel through the same cable tray. This separation imposed logistical inefficiencies, redundancy in installation labor, and increased complexity when coordinating maintenance or upgrades. Modern industrial automation, predictive maintenance systems, and real-time equipment monitoring have created a compelling case for convergence: combining power and high-speed data transmission within a single cable. This is precisely what (N)TSCGEWÖU-FO cables accomplish. The designation "-FO" (Fiber Optic) indicates that this cable carries not only the three-phase medium-voltage power (typically 6/10 kV or 12/20 kV) that the equipment needs to operate, but also 6, 12, or even 18 channels of high-speed optical fiber that can transmit control signals, sensor data, and video feeds from the excavator, stacker-reclaimer, or other equipment back to a central control station at the shore or mining office. 现代工业自动化推动了电力与数据传输的融合，(N)TSCGEWÖU-FO电缆在单一电缆中结合了中压电力和高速光纤通信。

Technical Department

on26/02/2026

(N)TSCGEWÖU-FO: Preventing Fiber Optic Breakage in High-Stress Reeling Environments

For the past several decades, industrial equipment operators have maintained strict separation between two completely different cable systems:…

Discover More

24 Min Read

Rail-mounted gantry (RMG) cranes are the largest and most powerful material handling systems in modern container ports and intermodal yards. Unlike traditional spreader cranes that hang from a fixed trolley, RMG cranes are completely self-contained electromechanical systems mounted on wheels that roll along parallel steel rails, spanning the entire width of a container yard. The electrical architecture of an RMG is fundamentally different from other port equipment, and this difference cascades into specific requirements for power transmission cables. RMG是现代集装箱港口最大最强的物料搬运系统。其完全自推进的电气架构对电缆提出了特殊要求。

Technical Department

on26/02/2026

Rheyfirm® (RS) 20kV: Migration Strategy for RMG Crane Cable Replacement

Rail-mounted gantry (RMG) cranes are the largest and most powerful material handling systems in modern container ports and intermodal yards.…

Discover More

23 Min Read

In the standardized designation system for medium-voltage reeling cables, the letter "K" in (N)TSKCGEWÖU stands for the German word "Kombination," which in this context means that the cable's earth (grounding) conductors are intentionally split and symmetrically distributed throughout the cable's cross-section, rather than being concentrated in a single conductor or asymmetrically placed. This small designation change — from (N)TSCGEWÖU to (N)TSKCGEWÖU — signals a fundamental rethinking of how the cable responds to mechanical stress, how it manages electrical currents, and critically, how it performs over thousands of duty cycles on monospiral (single-spiral) reeling drums. "K"代表Kombination，意指地线被分裂并对称分布在电缆横截面各处，而非集中在单个导体中。

Technical Department

on26/02/2026

(N)TSKCGEWÖU vs. (N)TSCGEWÖU: Why Splittable Earth Design Is Mandatory for Monospiral Reeling Drums

In the standardized designation system for medium-voltage reeling cables, the letter "K" in (N)TSKCGEWÖU stands for the German word…

Discover More

20 Min Read

In the design of lifting equipment — gantry cranes, hoists, spreaders, and material handlers — the cable reel drum is one of the largest, heaviest, and most expensive mechanical components. A crane's reel drum must be large enough to safely bend and unbend the cable thousands of times per day without introducing permanent damage, metal fatigue in the cable's conductors, or accelerated insulation degradation. Equipment engineers would naturally prefer smaller reel drums because they save weight, cost, and manufacturing complexity. However, the cable must bend to a minimum radius that the conductor and insulation materials can withstand without failure. That constraint — the cable's minimum bending radius specification — directly determines the smallest economically feasible reel drum diameter. 电缆的最小弯曲半径规范直接决定了可行的卷筒最小直径，这会影响整个设备的成本、重量和尺寸。

Technical Department

on26/02/2026

Trommelflex (K) NSHTÖU-J: Minimum Bending Radius Advantages Over Generic NSHTÖU Cables

In the design of lifting equipment — gantry cranes, hoists, spreaders, and material handlers — the cable reel drum is one of the largest,…

Discover More

17 Min Read

In containerized cargo terminals worldwide, rubber-tyred gantry cranes (RTGs) — along with their cousins, ship-to-shore (STS) cranes and automated stackers — operate under conditions more severe than most industrial power applications. These cranes move horizontally and vertically across the yard in continuous cycles, playing out and reeling in hundreds of meters of trailing cable through on-board rotary reels at speeds reaching 200 meters per minute. The cable must withstand not merely electrical stress, but relentless mechanical friction as it slides against metal reel drums, guide channels, and bearing surfaces — sometimes thousands of times per day. 在全球集装箱码头，RTG等港口设备通过卷筒快速卷绕释放拖曳电缆，每天承受数千次机械摩擦。

Technical Department

on26/02/2026

Tratosflex-ES3®: Polyurethane vs. Rubber Sheaths for High-Tension RTG Crane Reels

In containerized cargo terminals worldwide, rubber-tyred gantry cranes (RTGs) — along with their cousins, ship-to-shore (STS) cranes and…

Discover More

29 Min Read

If you work in heavy-duty mobile equipment—whether managing cranes in a container port, maintaining bucket wheel excavators in an open-pit mine, or specifying power systems for automated warehouse equipment—you have almost certainly encountered the term "PUR reeling cable" or heard engineers discussing Tratosflex as a benchmark product. What may be less clear is precisely what makes polyurethane (PUR) fundamentally different from traditional rubber compounds and why the shift toward PUR has become so pronounced in the past decade. To answer this question requires understanding the material science that underlies modern cable design, the mechanical demands that drive equipment specifications, and the practical advantages that PUR delivers in the field. 如果您在重型移动设备领域工作——无论是管理集装箱港口中的起重机、维护露天矿山中的斗轮堆取料机，还是为自动化仓储设备指定电源系统——您几乎肯定遇到过术语 "PUR 卷筒电缆" 或听到工程师讨论 Tratosflex 作为基准产品。可能不太清楚的是，聚氨酯（PUR）与传统橡胶化合物的根本差异是什么，以及为什么在过去十年中向 PUR 的转变变得如此明显。要回答这个问题需要理解现代电缆设计基础的材料科学、驱动设备规范的机械要求，以及 PUR 在现场提供的实际优势。

Technical Department

on26/02/2026

Tratosflex Equivalent: Finding Heavy-Duty PUR Reeling Cables in Stock for Port and Mining Operations

If you work in heavy-duty mobile equipment—whether managing cranes in a container port, maintaining bucket wheel excavators in an open-pit…

Discover More

22 Min Read

A pervasive misconception exists among electrical engineers and procurement specialists working with reeling cables for port machinery and heavy mining equipment: the belief that Panzerflex and (N)TSCGEWÖU represent two fundamentally different technical approaches or competing product lines. In reality, this confusion stems from a misunderstanding of how industrial cable standards and branding intersect. To clarify this relationship requires understanding what each term actually represents. 在与港口机械和重型采矿设备卷筒电缆合作的电气工程师和采购专家中存在一个普遍的误解：认为 Panzerflex 和 (N)TSCGEWÖU 代表两种根本不同的技术路线或竞争产品线。事实上，这种混淆源于对工业电缆标准和品牌如何相交的误解。澄清这种关系需要理解每个术语实际代表什么。

Technical Department

on26/02/2026

Prysmian Panzerflex vs. (N)TSCGEWÖU: Which Reeling Cable Should You Choose for Port and Mining Equipment?

A pervasive misconception exists among electrical engineers and procurement specialists working with reeling cables for port machinery and…

Discover More

22 Min Read

Walk into the procurement office of any major container port or container handling facility, and you will almost certainly encounter discussions about reeling cables for cranes. The conversation often centers around one particular product family: Draka's Buflex XTREME series. Since its introduction in the early 2000s, Buflex XTREME has become the de facto standard for high-speed, space-constrained applications across port machinery—rubber tyred gantry cranes (RTG), ship-to-shore cranes (STS), and mobile harbor equipment. The cable family has earned this reputation through genuine technical excellence: an exceptionally compact outer diameter, remarkable flexibility, and proven durability under continuous flexing stress. Yet despite—or perhaps because of—this market dominance, Buflex XTREME presents a formidable procurement challenge for port operators, especially those managing budgets across multiple facilities in different regions.

Technical Department

on26/02/2026

Draka Buflex XTREME Replacement Guide: High-Performance Reeling Cables for Port Cranes with Superior Cost-Effectiveness and Fast Delivery

Walk into the procurement office of any major container port or container handling facility, and you will almost certainly encounter…

Discover More

30 Min Read

在海上石油与天然气开采环境中，电缆系统必须承受极端的机械应力、化学腐蚀与温度波动。MOR® Polyrad® XT-125 系列的设计理念便是从这一现实需求出发，通过多层次的材料创新与严格的标准认证体系，为海上平台提供可靠的动力与控制方案。当电气工程师审核技术规格书（Datasheet）时，通常会严格核对以下几个维度以确保系统的安全性、合规性与长期稳定性。

Technical Department

on25/02/2026

MOR® Polyrad® XT-125: 600V Non-Armored Flexible Marine Power Cables with Superior Mud Oil Resistance and 125°C Continuous Rating for Offshore Drilling Platforms, Mud Motor Drive Systems, and Subsea Power Distribution

Comprehensive technical guide to MOR® Polyrad® XT-125 non-armored flexible marine power cables: Mud Oil-Resistant insulation, 125°C continuous…

Discover More

21 Min Read

Type X110P cable, GEXOL alternative, shipboard power cable, 110°C armored cable, marine cable, cross-linked polyolefin, IEEE 1580, IEEE 1202, IEC 60332, mud resistant cable, oil resistant

Technical Department

on25/02/2026

Nexans AmerCable GEXOL Alternative: Cost-Saving Type X110P Shipboard Cables with Superior Flexibility and Flame Retardance for Marine Vessels, Drilling Rigs, and Offshore Platforms

Type X110P cable, GEXOL alternative, shipboard power cable, 110°C armored cable, marine cable, cross-linked polyolefin, IEEE 1580, IEEE 1202,…

Discover More

23 Min Read

Comprehensive technical guide to Prysmian Bostrig Type P (600V-1000V) armored power cables: conductor flexibility, cross-linked polyolefin insulation, tinned copper braided armor, flame retardance testing, and ampacity calculations for offshore drilling, subsea, and marine power applications.

Technical Department

on25/02/2026

Prysmian Bostrig Type P Cross-Reference: Equivalent Marine Cables with Faster Lead Times and Superior Flexibility for Offshore Power Distribution

Comprehensive technical guide to Prysmian Bostrig Type P (600V-1000V) armored power cables: conductor flexibility, cross-linked polyolefin…

Discover More

34 Min Read

The act of splicing a medium-voltage cable in the field—joining two cable ends after they have already been installed in a drilling derrick or FPSO electrical room—occupies a unique and critical position in offshore electrical engineering. Unlike cable terminations (where the cable end is terminated to a switchgear cabinet or transformer winding terminal), field splices create a permanently joined section within the cable run itself. This joint must perform as if it were part of the original manufactured cable, maintaining perfect electrical, mechanical, and dielectric integrity in one of the world's most hostile environments: the vibration-laden, salt-spray-corroded, perpetually humid confines of an offshore platform. When a splice fails, it often fails catastrophically, potentially causing equipment damage, electrical hazards to personnel, and operational shutdowns that can cost hundreds of thousands of dollars per day.

Technical Department

on25/02/2026

Splicing Type MMV (37-105) 8kV Cables: Managing Tape and Braided Shields Offshore with Field-Proven Termination Techniques

The act of splicing a medium-voltage cable in the field—joining two cable ends after they have already been installed in a drilling derrick or…

Discover More

33 Min Read

Technical deep-dive into MPRXCX and MGCH medium-voltage marine cables for floating production storage and offloading vessels: XLPE vs. EPR insulation systems, DNV type-approval, ampacity calculations, EMI shielding design, and flame-retardant jacket specifications for FPSO electrical systems.

Technical Department

on25/02/2026

MPRXCX / MGCH Equivalents: Finding DNV Approved Medium Voltage Cables for FPSOs with Optimized XLPE and EPR Insulation Systems

Technical deep-dive into MPRXCX and MGCH medium-voltage marine cables for floating production storage and offloading vessels: XLPE vs. EPR…

Discover More

25 Min Read

When a marine electrical engineer opens a cable specification document for a 15 kV Type MMV cable, among the first technical parameters to be scrutinized is the notation of insulation level: either 100% or 133%. To the uninitiated, these seemingly abstract percentages might appear to be arbitrary marketing designations. In reality, they represent a profound engineering distinction rooted in power system grounding philosophy and the way electrical stress distributes across the cable insulation during both normal operation and fault conditions. Understanding this distinction is essential for anyone responsible for specifying cables for offshore platforms, FPSOs, or dynamic positioning vessels, because choosing the wrong insulation level can result in premature cable failures, cascading electrical faults, and operational disasters.

Technical Department

on25/02/2026

Understanding 100% vs. 133% Insulation Levels in Type MMV 15kV Marine Cables

When a marine electrical engineer opens a cable specification document for a 15 kV Type MMV cable, among the first technical parameters to be…

Discover More

32 Min Read

IEC 60092-354 mandates LSZH materials—typically halogen-free compounds based on thermoplastic polyethylene (HTPE), ethylene vinyl acetate (EVA), or polyurethane (PU). These materials meet stringent EN 61034 smoke emission criteria: less than 50% optical density when tested in a closed chamber, and minimal evolution of corrosive gases (measured as hydrochloric acid equivalent per EN 50267-2-1). For additional mechanical protection, ship cables are almost always specified with armoring: a steel wire or steel tape wrapping applied over the jacket.

Technical Department

on25/02/2026

IEC 60092 MV Cables vs. IEEE 1580 Type MMV: A Specifier’s Guide for Shipboard Power Distribution

IEC 60092-354 mandates LSZH materials—typically halogen-free compounds based on thermoplastic polyethylene (HTPE), ethylene vinyl acetate…

Discover More

20 Min Read

An offshore wind farm's electrical heart lies at its platform-mounted substation, often called an Offshore Substation (OSS) or offshore switching station. This facility sits 80 to 300 kilometers from shore, atop a jacket or floating foundation, constantly exposed to salt spray, extreme vibration from wind turbines, temperature swings, and corrosive humidity. The OSS's role is to gather power from dozens of wind turbines—each feeding in 10 to 15 megawatts—and consolidate that energy through a series of transformers and medium-voltage (MV) switchgear before feeding it via subsea cable to the onshore grid connection point. 海上风电场的电气心脏位于平台安装的变电站，通常称为海上变电站（OSS）或海上开关站。该设施位于离岸 80 至 300 公里处，坐落在导管架或浮式基础上，持续暴露于盐雾、风力发电机极端振动、温度波动和腐蚀性湿度。OSS 的作用是汇集来自数十台风力发电机的电力——每台 10 至 15 兆瓦——通过一系列变压器和中压（MV）开关柜进行整合，然后通过海底电缆输送到陆上并网点。

Technical Department

on25/02/2026

Type MMV 37-105 Cables (5kV–15kV): Powering Offshore Wind Electrical Substations with Flexible, High-Voltage Marine Integrity

An offshore wind farm's electrical heart lies at its platform-mounted substation, often called an Offshore Substation (OSS) or offshore…

Discover More

9 Min Read

Offshore drilling mud pumps represent some of the most mission-critical equipment on modern drilling platforms. These pumps are driven by variable frequency drive (VFD) systems that optimize power consumption and equipment performance through sophisticated electronic switching, yet this advanced power control technology introduces an insidious threat: VFD-induced electrical discharge machining (EDM) damage to motor bearings, known as fluting. When mud pumps experience unexpected bearing failure due to EDM fluting, unplanned downtime costs platform operators hundreds of thousands of dollars per day in lost production capacity.

Technical Department

on25/02/2026

Type MMV-VFD (15kV): Managing High-Frequency EMI in Medium Voltage Offshore Drives

Offshore drilling mud pumps represent some of the most mission-critical equipment on modern drilling platforms. These pumps are driven by…

Discover More

9 Min Read

Technical Department

on25/02/2026

2kV Type P VFD Cables: Preventing Motor Bearing Damage on Offshore Mud Pumps

Offshore drilling mud pumps represent some of the most mission-critical equipment on modern drilling platforms. These pumps are driven by…

Discover More

10 Min Read

NEK 606 UX/UX(I) Technical Specifications Table The comprehensive specifications table below presents the complete range of commercially available conductor sizes for NEK 606 cables. This data encompasses the critical parameters that electrical engineers require when conducting load calculations, short-circuit analysis, and installation planning for offshore electrical systems. All ampacity values reference the baseline condition of 45°C ambient temperature in free air, single conductor installation per IEC 60092-352 standards.

Technical Department

on25/02/2026

Troubleshooting NEK 606 UX/UX(I) Mud-Resistant Grounding Cables on Offshore Platforms

NEK 606 UX/UX(I) Technical Specifications Table The comprehensive specifications table below presents the complete range of commercially…

Discover More

11 Min Read

In the competitive landscape of international offshore project bidding, electrical engineers and procurement managers face a fundamental tension: delivering mission-critical power distribution systems while simultaneously optimizing capital expenditure. The emergence of cost-effective Type P cable designs （经济型 Type P 电缆设计） addresses this tension directly. These unarmored marine power cables, fully compliant with IEEE 1580 offshore cable specifications （IEEE 1580 海上电缆标准）, deliver measurable cost reductions across material procurement, logistics, and installation phases while maintaining rigorous electrical and safety performance standards. This installation guide addresses the engineering rationale behind cost-effective, unarmored Type P cable specifications and provides procurement teams with objective decision criteria for determining when these configurations are appropriate for their specific offshore applications.

Technical Department

on25/02/2026

Type P Cost-Effective Offshore Power Cables: Budget-Optimized Design for Global Drilling and Platform Applications

In the competitive landscape of international offshore project bidding, electrical engineers and procurement managers face a fundamental…

Discover More

10 Min Read

The GEXOL 37-102 cable family, manufactured by Nexans AmerCable （由Nexans AmerCable制造）, represents a sophisticated engineering solution that bridges North American marine cable standards with international protection requirements for hazardous location installations. Understanding the specific engineering principles that govern the "Armored & Sheathed (BS)" configuration is essential for electrical engineers and procurement specialists tasked with specifying cables for Zone 1 explosion-proof environments （防爆 1 区环境）, particularly in offshore drilling platforms, subsea installations, and petrochemical facilities.

Technical Department

on25/02/2026

GEXOL 37-102 Armored & Sheathed (BS): Installation Guide for Explosion Proof Zone 1

The GEXOL 37-102 cable family, manufactured by Nexans AmerCable （由Nexans AmerCable制造）, represents a sophisticated engineering solution that…

Discover More

8 Min Read

The selection of industrial power cables represents one of the most critical engineering decisions in drilling operations, whether on land or offshore. Two cable types dominate this application space: the Type SHD-GC （重型屏蔽接地检查电缆）, designed primarily for mobile mining and terrestrial drilling equipment, and the Type P （海洋平台电缆）, engineered specifically for harsh offshore and fixed platform environments. Though both cables operate at similar voltage ratings, they embody fundamentally different design philosophies that reflect the distinct mechanical, electrical, and safety demands of their respective application domains.

Technical Department

on25/02/2026

Type SHD-GC vs. Type P: Selecting the Right Trailing Cable for Land and Offshore Drilling

The selection of industrial power cables represents one of the most critical engineering decisions in drilling operations, whether on land or…

Discover More

10 Min Read

When electrical engineers and procurement managers specify cables for self-elevating drilling rigs—commonly known as jack-up rigs (自升式钻井平台)—they frequently encounter AmerCable 37-102 designations in technical specifications. The primary concern when evaluating equivalent cable solutions centers on whether alternative suppliers can deliver the same IEEE 1580 Type P core standard and extreme high-flexibility characteristics while offering improved lead times and cost optimization.

Technical Department

on25/02/2026

AmerCable 37-102 Equivalent: Sourcing High-Flexibility Type P Cables for Jack-Up Rigs

When electrical engineers and procurement managers specify cables for self-elevating drilling rigs—commonly known as jack-up rigs…

Discover More

9 Min Read

The European and American approaches to cable engineering reflect fundamentally different environmental threat models. BFOU cables manufactured to NEK 606 specifications incorporate halogen-free insulation, SHF2 H-M compound sheathing, and mica glass tape (MGT) as a fire barrier, enabling uninterrupted power delivery during fire situations in accordance with IEC 60331-21. This design prioritizes survival of critical systems during extreme thermal events—a recognized hazard in confined spaces such as engine rooms and living quarters aboard offshore vessels.

Technical Department

on25/02/2026

Why Your BFOU Cable Needs a Type N Jacket Upgrade?

The European and American approaches to cable engineering reflect fundamentally different environmental threat models. BFOU cables…

Discover More